68.3.1
ACTIVATE-DDRSM
With the function ACTIVATE-DDRSM for area(s) it is possible to configure the pair allocation and activate the double recording between the master and slave area(s), with the exception of ’PHY’-areas.
With ACTIVATE-DDRSM for devices the pair allocation will be configured and double recording will be activated between all areas of both devices, with the exception of ’PHY’-areas.
Procedure Overview
Command Code
Parameter
ACTIVATE-DDRSM
[UNIT=<param>],MASTERID=<number>,[MASTERAR=<param>]
,SLAVEID=<number>,[SLAVEAR=<param>],[REPLY=<param>];
Examples
1.
Configure pair allocation between devices on controller 2 (master) and 3 (slave) and activate the double recording.
Input:
ACT-DDRSM:,2,,3;
2.
Configure pair allocation between area F on controller 2 (master) and area G on controller 3 (slave) and activate the double recording.
Input:
ACT-DDRSM:A1,2,F,3,G;
3.
Configure pair allocations between areas E and G on controller 2 (master) and areas F and E on controller 3 (slave) and activate the double recording.
Input:
ACT-DDRSM:,2,E&G,3,F&E;
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.