71.2.1 ADD-DEFPP

When creating an entry with the appropriate call processing oriented data is entered in each case into the paying party assignment table.
Procedure Overview
 
Command Code
Parameter
 
ADD-DEFPP
CONNTYPE=<param>,[SUPLSERV=<param>],[SUBSID=<param>]
,[TRANSTYP=<param>],[LTU=<number>],[SLOT=<number>]
,[CCT=<number>],[BCHAN=<number>],CHRGEE1=<param>
,[CHRGEE2=<param>],[CHRGEE3=<param>],[CHRGEE4=<param>]
,[CHRGEE5=<param>],[CHRGEE6=<param>];
 
Examples:
1.
Creating of outgoing connections.
Two outgoing connections (CONNTYPE=OUTG) with the following parameters are created:
User defined entry outgoing 1:
A station is called, with a call forwarding (FWD) to external (supplementary service: call forwarding).
The costs of the call has to pay the first rerouted subscriber (paying party selection 1: first rerouted subscriber).
SUPLSERV=CALLFOR,
CHRGEE1=FIRSTRED;
Without this entry the default values (special system definitions or system default) are used. The entered values you can find in Section , “Definitions for outgoing connections”.
User defined entry outgoing 2:
An external call will pass through by several systems and transferred from attendant to external (supplementary service: call transfer, subscriber identification: attendant (AC), call transfer situation: both partners are in the public network).
The costs of the call has to pay the chargee who is determined in a other system of the network and transferred (paying party selection 1: chargee was determinated before in the network and transferred) or
the caller (paying party selection 2: calling station (caller)) or
if this does not admit the incoming trunk (AMO-TLZO) (paying party selection 3: number of calling (incoming) trunk determinated with the help of AMO-TLZO).
SUPLSERV=TRANSFER,
SUBSID=ATTEND,
TRANSTYP=BOPPUB,
CHRGEE1=BILLING,
CHRGEE2=CALLING,
CHRGEE3=TRUNK;
Without this entry the default values (special system definitions or system default) are used. The entered values you can find in Section , “Definitions for outgoing connections”.
Input:
ADD-DEFPP:CONNTYPE=OUTG,SUPLSERV=CALLFOR,CHRGEE1=FIRSTRED;
ADD-DEFPP:CONNTYPE=OUTG,SUPLSERV=TRANSFER,SUBSID=ATTEND,TRANSTYP=BOPPUB
          ,CHRGEE1=BILLING,CHRGEE2=CALLING,CHRGEE3=TRUNK;
2.
Creating of incoming connections.
Two incoming connections (CONNTYPE=INCO) with the following parameters are created:
User defined entry incoming 1:
The attendant console (AC) is called by external station (supplementary service: call transfer, subscriber identification: attendant, call transfer situation: both partners are in the public network).
The costs of the call has to pay the external station, which is attend from the attendant console (AC) (paying party selection 1: station, with that a connection came) or
if no call number was given from OFFICE, the incoming trunk (paying party selection 2: number of calling (incoming) trunk determinated with the help of AMO-TLZO).
SUPLSERV=TRANSFER,
SUBSID=ATTEND,
TRANSTYP=BOPPUB,
CHRGEE1=CONNECT,
CHRGEE2=TRUNK;
Without this entry the default values (special system definitions or system default) are used. The entered values you can find in Section , “Definitions for incoming connections”.
User defined entry incoming 2:
An incoming call from trunk 1-91-3-1 (line trunk unit (LTU): 1, specification of the mounting pitch in the LTU (SLOT): 91, circuit number: 3, number of ISDN B-channel: 1)
is to be paid by the incoming trunk (AMO-TLZO) (paying party selection 1: number of calling (incoming/outgoing) trunk determinated with the help of AMO-TLZO).
LTU=1,
SLOT=91,
CCT=3,
BCHAN=1,
CHRGEE1=TRUNK;
Without this entry the default values (special system definitions or system default) are used. The entered values you can find in Section , “Definitions for incoming connections”.
Input:
ADD-DEFPP:CONNTYPE=INCO,SUPLSERV=TRANSFER,SUBSID=ATTEND,TRANSTYP=BOPPUB
         ,CHRGEE1=CONNECT,CHRGEE2=TRUNK;
ADD-DEFPP:CONNTYPE=INCO,LTU=1,SLOT=91,CCT=3,BCHAN=1,CHRGEE1=TRUNK;
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620
 © 09/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.