71.2.2 CHANGE-DEFPP

Modifying entries from the paying party assignment tables can be executed only for user defined entries.

The following parameters are used for the identification of an entry and remain unchanged therefore:

CONNTYPE ... selection according to type of connection
SUPLSERV .... specification of supplementary service
SUBSID .......... subscriber identification
TRANSTYP .... call transfer situation
LTU ................. line trunk unit
SLOT .............. mounting pitch in the LTU)
CCT ................ circuit number and
BCHAN .......... number of ISDN B-channel.

At least the value CHRGEE1, i.e. the first value of the paying party assignment tables (PAYPART1 to PAYPART6) must be entered in the list. The entire list is always modified.

Procedure Overview


Command Code	Parameter
CHANGE-DEFPP	CONNTYPE=<param>,[SUPLSERV=<param>],[SUBSID=<param>] ,[TRANSTYP=<param>],[LTU=<number>],[SLOT=<number>] ,[CCT=<number>],[BCHAN=<number>],CHRGEE1=<param> ,[CHRGEE2=<param>],[CHRGEE3=<param>],[CHRGEE4=<param>] ,[CHRGEE5=<param>],[CHRGEE6=<param>];

Examples

Change of parameters of outgoing connections.

The following parameters of the outgoing connection (CONNTYPE=OUTG) are changed:

User defined entry outgoing 1:

A station is called, with a call forwarding (FWD) to external (supplementary service: call forwarding).

The costs of the call has to pay the caller (paying party selection 1: calling station (caller)).

SUPLSERV=CALLFOR,
CHRGEE1=CALLING;

Input:

CHANGE-DEFPP:CONNTYPE=OUTG,SUPLSERV=CALLFOR,CHRGEE1=CALLING;

Change of parameters of incoming connections.

The following parameters of the incoming connection (CONNTYPE=INCO) are changed:

User defined entry incoming 1:

The attendant console (AC) is called by external station (supplementary service: call transfer, subscriber identification: attendant, call transfer situation: both partners are in the public network).

The costs of the call are assigned now to the virtual number (paying party selection 1: number of calling (incoming) trunk determinated with the help of AMO-TLZO).

SUPLSERV=TRANSFER,
SUBSID=ATTEND,
TRANSTYP=BOPPUB,
CHRGEE1=TRUNK;

Input:

CHANGE-DEFPP:CONNTYPE=INCO,SUPLSERV=TRANSFER,SUBSID=ATTEND,TRANSTYP=BOPPUB,CHRGEE1=TRUNK;

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.