71.3 Parameter Description


BCHAN	Number of the ISDN B-channel
	Type of Input	:	Single value, range, optional
	Possible Values	:	0 to 30	(Value 0: only for analog circuits)

CCT	Circuit number
	Type of Input	:	Single value, range, optional
	Possible Values	:	0 to 255

CHRGEEn	Paying party selection
	Type of Input	:	Single value, optional
		:	Mandatory CHRGEE1 (ADD, CHANGE, DELETE)
	Possible Values	:	BILLING	= Billing: The chargee information was determined previously in the network and transferred.
			CALLED	= called party: Dialed number (called). Note: Is to be always used as one of the last alternatives in the order of determination (better CHRGEEn = CONNECT), the paying party id (SUBSID=SUBSCR) and the paying party node number (PPLV0=0 / PPLV1=0 / PPLV2=0) are belonging to the called party, is only filled out with the default value.
			CALLING	= calling party: Calling station (caller).
			CONNECT	= connected party: Station with that a connection came.
			FIRSTRED	= first redirecting party: First rerouted subscriber.
			KEYCALL	= key line of calling: Number of the other line on use of a key set, which is used for the call. Calling contains the number of the terminal in this case.
			KEYCONN	= key line of connected: Number of the other line on use of a key set, which is used for the receiving of the call. Connected contains the number of the terminal in this case.
			LASTRED	= last redirecting party: Last rerouted sub-scriber.
			MOUCALL	= mobile user number of calling: Number of the homeland station of the calling station, who identifies himself with a personal identification number (PIN) on an other terminal. Calling contains the number of the terminal in this case.

			TRANSPTY	= transferring party: Attendent subscriber with a transfer call.
			TRUNK	= virtual number: Number of calling (incoming / outgoing) trunk determined with the help of the AMO-TLZO.

CONNTYPE	Selection according to type of the connection
	Type of Input	:	Single value, optional
			Mandatory (ADD, CHANGE, DELETE)
	Possible Values	:	ALL	= For branch DISPLAY only: All connections of the paying party assignment tables (connection type: internal / outgoing / incoming) are output.
			INCO	= The entries of the paying party assignment tables for incoming connections are pro-cessed.
			INT	= For branch DISPLAY only: The entries of the paying party assignment tables for internal connections are output.
			OUTG	= The entries of the paying party assignment tables for outgoing connections are processed.

LTU	Line Trunk Unit
	Type of Input	:	Single value, range, optional
	Possible Values	:	1 to 99
	Note	:	LTU 16 is used Hicom internal.

SLOT	Specification of the mounting pitch in the LTU
	Type of Input	:	Single value, range, optional
	Possible Values	:	1 to 121	A suitable module must be configured for the slot addressed by PEN (AMO BCSU).

SUBSID	Specification of subscriber identification
	Type of Input	:	Single value, optional
	Possible Values	:	ANY	= Any identification
			ATTEND	= Attendant
			HAS	= PBX set
			NIGHT	= Night server
			SECR	= Secretary
			SUBSCR	= Subscriber To the value SUBSCR the following identifications are illustrated: Service module, Special charging, Maintenance equipment and Public phone.

SUPLSERV	Specification of the supplementary service
	Type of Input	:	Single value, optional
	Possible Values	:	ANY	= To the value ANY the following supplementary services are illustrated, for which a paying party selection is executed. All identifications not stated explicitly at the following values are covered however anyhow by the value ANY.
			CALLBACK	= Call back
			CALLFOR	= To the value CALLFOR the following supplementary services are illustrated: CFB: call forwarding busy, CFNR: call forwarding no reply, CFU: call forwarding unconditional.
			CONSULT	= Consultation call
			HUNTGRP	= Hunting group
			NORMAL	= Normal call, To the value NORMAL the following identifications are illustrated: Conference and Not defined.
			OVERRIDE	= Override
			PICKUP	= Call pickup
			SPECENV	= For the special equipment the following identifications are illustrated: Mail box, Paging, Dictation, Credit card charging, Reverse charging and Door opening system.
			TRANSFER	= Call transfer
			TRANSIT	= Transit call
			REROUTE	= Rerouting

TRANSTYP	Call-Transfer situation
	Type of Input	:	Single value, optional
	Possible Values	:	ANY	= Any transfer
			APTYPUB	= A-side from public network.
			BOPINT	= Both partners are internal.
			BOPPUB	= Both partners are in the public network.
			BPTYPUB	= B-side from public network.

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.