72.2.1 ADD-DEFTM

When creating an entry with the appropriate data of the measurement object (measurement object types) is entered in each case into the measurement object table.
Procedure Overview
 
Command Code
Parameter
 
ADD-DEFTM
OBJECT=SUBSCR,NUMBER=<number>;
(1)
 
 
 
 
|OBJECT=TRUNK,LTU=<number>,[SLOT=<number>]
 ,[CCT=<number>];
(2)
 
 
 
 
|OBJECT=ATTND,NUMBER=<number>;
(3)
 
 
 
 
|OBJECT=TRUNKGRP,TRUNKGRNO=<number>;
(4)
 
 
 
 
|OBJECT=ATTNDGRP,ATNDGRNO=<number>;
(5)
 
 
 
 
|OBJECT=HUNTHEAD,NUMBER=<number>;
(6)
Examples:
1.
Creating of a subscriber with the number 3444.
Input:
ADD-DEFTM:OBJECT=SUBSCR,NUMBER=3444;
2.
Creating of the trunk 1-79-4.
Line trunk unit: 1
specification of the mounting pitch in the LTU: 79 and
circuit number: 4
Input:
ADD-DEFTM:OBJECT=TRUNK,LTU=1,SLOT=79,CCT=4;
3.
Creating of an attendant with the number 4402.
Input:
ADD-DEFTM:OBJECT=ATTND,NUMBER=4402;
4.
Creating of a trunk group with the number 75.
Input:
ADD-DEFTM:OBJECT=TRUNKGRP,TRUNKGRNO=75;
5.
Creating of an attendant group with the number 0.
Input:
ADD-DEFTM:OBJECT=ATTNDGRP,ATNDGRNO=0;
6.
Creating of a hunt group with the pilot number 2404.
Input:
ADD-DEFTM:OBJECT=HUNTHEAD,NUMBER=2404;
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620
 © 09/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.