72.4
Error Messages and Advisories
72.4.1
Error Messages
F01:
SUBSCRIBER, ATTENDANT, TRUNK GROUP, ATTENDANT GROUP OR NUMBER OF HUNT GROUP OVERLAPPING WITH EXISTING ENTRY.
F02:
not used
F03:
PARAMETER SLOT IS MISSING.
F04:
ENTRY ALREADY EXISTS.
F05:
RANGE IN PARAMETER LTU IS ONLY ALLOWED, IF PARAMETERS SLOT AND CCT COVER THEIR WHOLE RANGE.
F06:
RANGE IN PARAMETER SLOT IS ONLY ALLOWED, IF PARAMETER CCT COVERS ITS WHOLE RANGE.
F07:
ENTRY ALREADY EXISTS, WHERE TRUNK RANGE OVERLAPS.
F08:
TABLE IS FULL.
F09:
ENTRY NOT FOUND.
F10:
ONLY THE WHOLE RANGE CAN BE DELETED.
F11:
AREA LIMITS MUST BE OF THE SAME LENGTH.
F12:
SUBSCRIBER, ATTENDANT OR NUMBER OF HUNT GROUP INCLUDING EXISTING ENTRY.
F13:
THE AREA IST EMPTY.
F14:
THE VALUE OF PARAMETER ACTLEV IS ONLY TO BE ALLOWED TO BE SMALLER OR EQUAL THE VALUE OF DEACTLEV.
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.