NOTE: The DID Conversion Rule uses the first two DIGITS of the
incoming expected DIGITS as an index into the DIDCR table.
The remaining DIGITS and the table entry build the new number
for the System to route the Call. If no conversion is wanted,
the table entry defaults to its own TBLIDX value (0-99) and this
will be displayed as empty spaces in the table. So if for
TBLIDX 12 the value 12 is entered, the display will not show
this entry.

Example 2:

Display trunks supporting DID which reference rule index 2.

Input:

DISPLAY-DIDCR:DIDTRUNK,2;

Output:

DISPLAY-DIDCR:DIDTRUNK,2;
H500: AMO DIDCR STARTED
H2: NO LTG-LTU-BOARD NO.-CIRCUIT NO. ACCESSES THIS RULE TABLE.
AMO-DIDCR-... DIRECT INWARD DIAL DIGIT_CONVERSION_RULE
DISPLAY EXECUTED;

Example 3:

Display PRI trunks which reference rule index 2.

Input:

DISPLAY-DIDCR:PRITRUNK,2;

Output:

DISPLAY-DIDCR:PRITRUNK,2;
H500: AMO DIDCR STARTED
PRI TRUNKS ASSOCIATED WITH RULE TABLE 2
----------------------------------------

LTG-LTU-BOARD NO.-CIRCUIT NO.
-------------------------------------
1- 2- 63- 5 1- 4- 101- 7
1- 4- 103- 7
AMO-DIDCR-... DIRECT INWARD DIAL DIGIT_CONVERSION_RULE
DISPLAY EXECUTED;

Example 5:

Display service rule table 1.

Input:

DISPLAY-DIDCR:SRT,1;

Output:

DISPLAY-DIDCR:SRT,1;
H500: AMO DIDCR STARTED
PRI DID SERVICE RULE TABLE 1

NETWORK SERVICE RULEIDX
-------------------------
FX 1
INTLWATS 0
INWATS 1
LDS 2
NONE 0
PPC900 2
SDS 0
TTA 0
VPN 0
AMO-DIDCR-... DIRECT INWARD DIAL DIGIT_CONVERSION_RULE
DISPLAY EXECUTED;

Example 6:

Display SID/ANI-data for Network Service INWATS of rule index 1.

Input:

DISPLAY-DIDCR:SVC,INWATS,1;

Output:

DISPLAY-DIDCR:SVC,INWATS,1;
H500: AMO DIDCR STARTED
SID/ANI-DATA FOR INWATS AND RULEIDX 1

SVC_ SVC_ SVC_ SVC_ SVC_
IDX REQUEST IDX REQUEST IDX REQUEST IDX REQUEST IDX REQUEST

00 ANI 20 SID 40 60 80
01 ANI 21 SID 41 61 81
02 ANI 22 42 62 82
03 ANI 23 43 63 83
04 ANI 24 44 64 84
05 ANI 25 45 65 85
06 ANI 26 46 66 86
07 ANI 27 47 67 87
08 ANI 28 48 68 88
09 ANI 29 49 69 89
10 ANI 30 50 70 90
11 ANI 31 51 71 91
12 ANI 32 52 72 92
13 ANI 33 SIDPREF 53 73 93
14 34 54 74 94
15 35 55 75 95
16 36 56 76 96
17 37 57 77 97
18 SID 38 58 78 98
19 SID 39 59 79 99

THE EMPTY SPACES ARE INITIALIZED WITH NO_REQUEST.
AMO-DIDCR-... DIRECT INWARD DIAL DIGIT_CONVERSION_RULE
DISPLAY EXECUTED;

Example 7:

Display SID/ANI-data for Network Service INWATS MEG8.

Input:

DISPLAY-DIDCR:SVC,INWATS;
Output:

DISPLAY-DIDCR:SVC,INWATS;
H500: AMO DIDCR STARTED
SID/ANI-DATA FOR INWATS AND RULEIDX 1

SVC_ SVC_ SVC_ SVC_ SVC_
IDX REQUEST IDX REQUEST IDX REQUEST IDX REQUEST IDX REQUEST

00 ANI 20 SID 40 60 80
01 ANI 21 SID 41 61 81
02 ANI 22 42 62 82
03 ANI 23 43 63 83
04 ANI 24 44 64 84
05 ANI 25 45 65 85
06 ANI 26 46 66 86
07 ANI 27 47 67 87
08 ANI 28 48 68 88
09 ANI 29 49 69 89
10 ANI 30 50 70 90
11 ANI 31 51 71 91
12 ANI 32 52 72 92
13 ANI 33 SIDPREF 53 73 93
14 34 54 74 94
15 35 55 75 95
16 36 56 76 96
17 37 57 77 97
18 SID 38 58 78 98
19 SID 39 59 79 99

THE EMPTY SPACES ARE INITIALIZED WITH NO_REQUEST.


H5: NO SID/ANI DATA FOR SERVICE INWATS AND RULEIDX 2
H5: NO SID/ANI DATA FOR SERVICE INWATS AND RULEIDX 3
H5: NO SID/ANI DATA FOR SERVICE INWATS AND RULEIDX 4
H5: NO SID/ANI DATA FOR SERVICE INWATS AND RULEIDX 5
H5: NO SID/ANI DATA FOR SERVICE INWATS AND RULEIDX 6
H5: NO SID/ANI DATA FOR SERVICE INWATS AND RULEIDX 7
H5: NO SID/ANI DATA FOR SERVICE INWATS AND RULEIDX 8
H5: NO SID/ANI DATA FOR SERVICE INWATS AND RULEIDX 9
H5: NO SID/ANI DATA FOR SERVICE INWATS AND RULEIDX 10
H5: NO SID/ANI DATA FOR SERVICE INWATS AND RULEIDX 11
H5: NO SID/ANI DATA FOR SERVICE INWATS AND RULEIDX 12
H5: NO SID/ANI DATA FOR SERVICE INWATS AND RULEIDX 13.
H5: NO SID/ANI DATA FOR SERVICE INWATS AND RULEIDX 14.
H5: NO SID/ANI DATA FOR SERVICE INWATS AND RULEIDX 15.
AMO-DIDCR-... DIRECT INWARD DIAL DIGIT_CONVERSION_RULE
DISPLAY EXECUTED;