DELDIG Number of digits to be deleted
INPUT RANGE: 1 or 2 digit
CLASS OF VALUE: numeric
PARAMETER CLASS: required (add)
INPUT TYPE: single value (add)
POSSIBLE VALUES: 0 to 14
(Valid for both ISDN and analog trunks)
DIGITS Digits in theDIDCR table
INPUT RANGE: 1 to 6 digits
CLASS OF VALUE: alphanumeric
PARAMETER CLASS: required (change)
optional (add)
INPUT TYPE: single value (add, change)
chained single values (add, change)
POSSIBLE VALUES: range(0:9),*,#
NOTE: Up to 9 DIGITS can be entered at one time.
NETSVC The Network Service used in the SRTABLE and index to the
SID/ANI-data.
INPUT RANGE: 2-7 chars
CLASS OF VALUE: identifier
PARAMETER CLASS: required (change, del=svc, disp, reg)
optional (del=srt)
INPUT TYPE: single value required (change, del, disp, reg)
POSSIBLE VALUES:
FX FOREIGN EXCHANGE ACCESS SERVICE
INTLWATS INTERNATIONAL LONG DISTANCE
INWATS MEGACOM/MCI 800,INCOMING WATS
LDS LONG DISTANCE SERVICE
NONE NOT A SPECIAL DEVICE
PPC900 MULTIQUEST, MCI 900
SDS ACCU
TTA TIE TRUNK ACCESS
VPN SDN, MCI VNET, PRIVATE NW SVC
NOTE: Only the Network Services INWATS/VPN/SDS/PPC900
can request SID
or ANI information.
DEFAULT VALUE: Not entered (del=svc)
RULEIDX Index toDIDCR table
INPUT RANGE: 1 to 2 digits
CLASS OF VALUE: numeric
PARAMETER CLASS: required (add, change, del, disp, reg=did)
optional (disp=svc, reg=svc)
INPUT TYPE: single value (add, change, del, disp, reg)
range (del, disp, reg)
chained single values (del)
POSSIBLE VALUES: 1 to 20
DEFAULT VALUE: all (disp=svc, reg=svc)
SRTABLE Number of the used SRT table
INPUT RANGE: 1 to 2 digits
CLASS OF VALUE: numeric
PARAMETER CLASS: required (add, change, del)
optional (disp, reg)
INPUT TYPE: single value (add, change, del, disp, reg)
POSSIBLE VALUES: range(0:15)
DEFAULT VALUE: all (disp, reg)
SVCDATA SID/ANI-data to be entered for a Service
INPUT RANGE: 3 to 7 chars
CLASS OF VALUE: string,validation
PARAMETER CLASS: required (change)
INPUT TYPE: single value (change)
POSSIBLE VALUES: ANI ( ani-only )
ANIPREF ( ani-preferred )
SID ( sid-only )
SIDPREF ( sid-preferred )
NOREQU ( no request )
SVCIDX Index to the SID/ANI-data information in the
DIDCR table
INPUT RANGE: 1 to 2 digits
CLASS OF VALUE: numeric
PARAMETER CLASS: required (change)
optional (del)
INPUT TYPE: single value (change, del)
range (change, del)
POSSIBLE VALUES: range(0:99)
DEFAULT VALUE: not entered
TBLIDX Index to a digit string in a DIDCR table.
INPUT RANGE: 1 to 2 digits
CLASS OF VALUE: numeric
PARAMETER CLASS: required (change)
optional (add, del)
INPUT TYPE: single value (add, change, del)
range (add, change, del) (up to 9)
POSSIBLE VALUES: range(0:99)
DEFAULT VALUE: not entered (add, del)
TOTDIG Total number of digits assigned to a DID- or PRI- trunk.
INPUT RANGE: 1 or 2 digits
CLASS OF VALUE: numeric
PARAMETER CLASS: required (add)
INPUT TYPE: single value (add)
POSSIBLE VALUES: 2 to 16
(Valid for both ISDN and analog trunks)
TYPE Determine which display will be shown or action to take.
INPUT RANGE: 3 to 8 chars
CLASS OF VALUE: string, validation
PARAMETER CLASS: required (add, change)
INPUT TYPE: single value (add, change)
POSSIBLE VALUES: SPECTBL (disp)
DIDTRUNK (disp-DID and E&M trunks)
PRITRUNK (disp-PRI trunks)
RULETBL (disp)
DID (add, change, del, reg)
SRT (add, change, del, disp, reg)
SVC (change, del, disp, reg)