77.11.2 Advisories

 
H01:
ONLY <xxxx>H BYTES CAN BE ACCESSED
 
This messages explains the reason for a failed attempt at read
or write access.
H02:
NO DATA FOUND
 
This message explains the reason for a failed attempt at data
output.
H03:
REQUESTED FUNCTION NOT AVAILABLE
 
This messages means that the input function or command is not available on the processor accessed, or is not applicable.
 
 
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620
 © 09/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.