78.4.2 INPUT-DISPS

The action INPUT-DISPS is only used for WRITE-READ access, and cannot be entered by the user at the administration and maintenance terminal (AMT). Only the text below is displayed at the AMT as an input request to the user (the asterisk which follows the text indicates the ready state):

DISPLAYER-INPUT IN <processor name> PLEASE:
*

This output text also indicates that the AMO has successfully executed the preceding command.

The following commands are possible:


CMD=	CHAR,CTYPE=<param>;
CMD=	COPY,CTYPE=DEF,[NAME=<string>],[AREA=<param>-<param>];
CMD=	COPY,CTYPE=DBL[,NAME=<string>];
CMD=	DEF,CTYPE=ADR,NAME=<string>,TYPE=ADR,ADR=<hex>-<hex>;
CMD=	DEF,CTYPE=ADR,NAME=<string>,TYPE=TBL,TBL=<string>
	,IDX=<number>,DISPLACE=<number>;
CMD=	DEF,CTYPE=LOGNAME,NAME=<string>,AREA=<param>
	,LEN=<number>,IDX=<number>&&<number>;
CMD=	DEL,CTYPE=DEF,[NAME=<string>],AREA=<param>;
CMD=	DIST,NO=<number>;
CMD=	DUMP,CTYPE=ADR,NAME=<string>,UNIT=<param>,NO=<number>;
CMD=	DUMP,CTYPE=DA,ADR=<hex>,UNIT=<param>,NO=<number>;
CMD=	DUMP,CTYPE=LOGNAME,NAME=<string>,IDX=<number>;
CMD=	E,FILE=<string>;
CMD=	END;
CMD=	EV,CTYPE=D,NO=<number>;
CMD=	EV,CTYPE=H,VAL=<hex>;
CMD=	FILE,FILE=<string>,[NO=<number>];
CMD=	LST,CTYPE=ADR,NAME=<string>,UNIT=<param>,NO=<number>;
CMD=	LST,CTYPE=DA,ADR=<hex>-<hex>,UNIT=<param>,NO=<number>;
CMD=	LST,CTYPE=DEF,[NAME=<string>],AREA=<param>;
CMD=	LST,CTYPE=INT,TYPE=CPBH;
CMD=	LST,CTYPE=INT,TYPE=BCA;
CMD=	LST,CTYPE=INT,TYPE=BCASA,SEL=HD,FILE=<string>;
CMD=	LST,CTYPE=INT,TYPE=BCASA,SEL=SCREEN,[DISPLACE=<number>],
	,[LEN=<number>],[CONTINUE=<param>];
CMD=	LST,CTYPE=INT,TYPE=BDTYT[,BDID=<hex>];
CMD=	LST,CTYPE=INT,TYPE=STA,SEL=LTG,LTG=<number>;
CMD=	LST,CTYPE=INT,TYPE=STA,SEL=LTU,LTG=<number>,LTU=<number>;
CMD=	LST,CTYPE=INT,TYPE=STA,SEL=BOARD,LTG=<number>,LTU=<number>,
	,SLOT=<number>;
CMD=	LST,CTYPE=LOGNAME,NAME=<string>,IDX=<number>;
CMD=	LST,CTYPE=SW,TYPE=<param>,SEL=CIR,LTG=<number>,LTU=<number>
	,SLOT=<number>,CCT=<number>[,SU=<number>,DI=<number>];
CMD=	LST,CTYPE=SW,TYPE=<param>,SEL=CRF,LTG=<number>,PAR1=<number>
	,PAR2=<number>;
CMD=	LST,CTYPE=SW,TYPE=<param>,SEL=DTI,LTG=<number>,DTI=<number>;
CMD=	LST,CTYPE=SW,TYPE=<param>,SEL=IDX,LTG=<number>,IDX=<number>;
CMD=	LST,CTYPE=SW,TYPE=<param>,SEL=LN,LTG=<number>
	,LN=<number>[,SU=<number>,DI=<number>];
CMD=	LST,CTYPE=SW,TYPE=<param>,SEL=LODEN,LODEN=<number>;
CMD=	LST,CTYPE=SW,TYPE=<param>,SEL=STNO,STNO=<key-num>,SVC=<param>;
CMD=	LST,CTYPE=SW,TYPE=<param>,SEL=LTU,LTG=<number>,LTU=<number>;
CMD=	LST,CTYPE=SW,TYPE=FREE,SEL=ALL,LTG=<number>;
CMD=	LST,CTYPE=SW,TYPE=FREE,SEL=LNPTH,LTG=<number>;
CMD=	LST,CTYPE=SW,TYPE=SZ,SEL=ALL,LTG=<number>;
CMD=	LST,CTYPE=SW,TYPE=SZ,SEL=BCH;
CMD=	LST,CTYPE=SW,TYPE=SZ,SEL=BUF,LTG=<number>;
CMD=	LST,CTYPE=SW,TYPE=SZ,SEL=CPB;
CMD=	LST,CTYPE=SW,TYPE=SZ,SEL=DEV;
CMD=	LST,CTYPE=SW,TYPE=SZ,SEL=LNPTH,LTG=<number>;
CMD=	P,PROCID=<param>;
CMD=	PATCH,CTYPE=ADR,NAME=<string>,UNIT=<param>
	,NO=<number>,VAL=<hex>;
CMD=	PATCH,CTYPE=DA,ADR=<hex>,UNIT=<param>
	,NO=<number>,VAL=<hex>;
CMD=	PATCH,CTYPE=LOGNAME,NAME=<string>,UNIT=<param>,
	,NO=<number>,VAL=<hex>,IDX=<number>,DISPLACE=<number>;
CMD=	SET,CTYPE=ADR,NAME=<string>,UNIT=<param>
	,NO=<number>,VAL=<hex>;
CMD=	SET,CTYPE=DA,ADR=<hex>-<hex>,UNIT=<param>
	,NO=<number>,VAL=<hex>;
CMD=	SET,CTYPE=LOGNAME,NAME=<string>,UNIT=<param>,
	,NO=<number>,VAL=<hex>,IDX=<number>,DISPLACE=<number>;

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.