83.3.4
RESTART-DSSU
This function resets devices, that means the commands DEACTIVATE and ACTIVATE are combined in one order. For ranges all devices will be deactivated first and activated afterwards. All deactivations will be done with OFFTYPE=DI, all activations will be done with ONTYPE=AUL. For stationnumbers all services will be switched. The last reference clock generator can not be reset by means of this function, the message H10 will be displayed.
Procedure Overview
Command Code
Parameter
RESTART-DSSU
TYPE=STNO,STNO=<number>;
|TYPE=PEN,PEN1=<pen>,[PEN2=<pen>];
Example
1.
The line at port 1-1-6-1 is to be reset.
Input:
RESTART-DSSU:PEN,1-1-6-1;
Output:
H01: SLMA 1-1-6-1 DEACTIVATED
H01: SLMA 1-1-6-1 ACTIVATED (READY)
2.
The devices with stationnumbers 252 to 256 and 205 are to be reset.
Input:
RESTART-DSSU:STNO,252&&256&205;
Possible outputs:
H01: STNO 252 DEACTIVATED
H03: FAX 252 DEACTIVATED
F12: STNO 253 NOT CONFIGURED
F12: STNO 254 NOT CONFIGURED
F12: STNO 255 NOT CONFIGURED
H01: STNO 256 DEACTIVATED
H04: FAX 256 DEACTIVATED
H01: STNO 205 DEACTIVATED
H05: FAX 205 DEACTIVATED
H01: STNO 252 ACTIVATED (READY)
H01: FAX 252 EINGEACTIVATEDSCHALTET (READY)
F12: STNO 253 NOT CONFIGURED
F12: STNO 254 NOT CONFIGURED
F12: STNO 255 NOT CONFIGURED
H01: STNO 256 ACTIVATED (READY)
H01: FAX 256 ACTIVATED (READY)
H01: STNO 205 ACTIVATED (READY)
H01: FAX 205 ACTIVATED (READY)
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.