83.5.2 Advisories



H01:	xxxx xxxxx ACTIVATED
H02:	xxxx xxxxx ACTIVATED - NOT READY (<status>)
H03:	xxxx xxxxx DEACTIVATED
H04:	xxxx xxxxx PRE-BLOCKED (<status>)
H05:	xxxx xxxxx DEACTIVATED FOR LONG PERIOD (NEQ STATE)
H06:	AMO DSSU INTERRUPTED
	(the AMO has been interrupted by a BREAK command or by the BREAK key.)
H07:	xxxx xxxxx IS ONE OF THE TWO CONNECTIONS OF A MODEM
H08:	THE DEACTIVATE JOB AFFECTS THE CURRENT REFERENCE CLOCK GENERATOR
	PLEASE ANSWER PARAMETER REFOFF
	Y . . . . DEACTIVATE CURRENT REFERENCE CLOCK GENERATOR
	N . . . . DO NOT DEACTIVATE CURRENT REFERENCE CLOCK GENERATOR
	(If Y is specified, the dependability system switches to another
	reference clock generator.)
H09:	THE DEACTIVATE JOB AFFECTS THE LAST POSSIBLE REFERENCE CLOCK
	GENERATOR
	******** THE SYSTEM CANNOT ADOPT A REFERENCE CLOCK ********
	PLEASE ANSWER PARAMETER REFOFF
	Y . . . . DEACTIVATE CURRENT REFERENCE CLOCK GENERATOR
	N . . . . DO NOT DEACTIVATE CURRENT REFERENCE CLOCK GENERATOR
	(If Y is answered, all reference clock generators are deactivated)
H10:	PEN xxxxx NOT DEACTIVATED (REFERENCE CLOCK GENERATOR)
H11:	STNO <stno> MSN-NUMBER ACTIVATED FOR CP
H12:	STNO <stno> FOR SERVICE <svc> NOT SWITCHED (MSN-NUMBER)
H13:	STNO <stno> MSN-NUMBER DEACTIVATED FOR CP
H14:	STNO <stno> MSN-NUMBER DEACTIVATED WITH PRE-BLOCKING FOR CP
H15:	MSN-NUMBERS WILL BE SWITCHED WITH ONTYPE=ANL, ALL OTHERS WITH ONTYPE=<ontype>
H16:	MSN-NUMBERS WILL BE SWITCHED WITH OFFTYPE=DI, ALL OTHERS WITH OFFTYPE=<offtype>
H17:	STNO <stno> SIGNED OFF
H18:	STNO <stno> SIGNED ON TO PEN <ltg>-<ltu>-<slot>-<cct> xxx (<tsi>)
H19:	TSI <tsi> NOT VALID, A VALID TSI WILL BE SEARCHED
H20:	<block\|unblock\|reset> FOR PEN <ltg>-<ltu>-<slot>-<cct> INITIATED
H21:	BASESTATION <ltg>-<ltu>-<slot>-<cct> LOADED
H22:	BASESTATION CAN BE LOADED ONLY BY MEANS OF EXEC-DSSU:<ltg>,<ltu>,<slot>;
H23:	B-CHANNEL <bchl> NOT ASSIGNED
H24:	PEN <ltg>-<ltu>-<slot>-<cct> IS VOICE COMPRESSION PARTNER, THEREFORE THE VCM CIRCUIT WILL BE SWITCHED FIRST
H25:	FOR OUTGOING ONLY B-CHANNEL <bchl> NO BLOCKING POSSIBLE
H26:	NO ACKNOWLEDGE OF LAST MESSAGE RECEIVED TO B-CHANNEL <bchl>. NO <block\|unblock\|reset> POSSIBLE
H27:	B-CHANNEL <bchl> STATE IS ALREADY <block\|unblock\|reset>
H28:	CORDLESS ADMIN STATION MAY NOT BE SWITCHED. USE AMO BSSU TO SWITCH.
H29:	RESTART OF STMA-CIRCUITS NOT ALLOWED. USE DEACT- AND ACT-DSSU.
H30:	xxxx xxxxx WAS ALREADY ACTIVATED
	CIRCUIT DATA HAS NOT BEEN LOADED
	LOADING CAN BE INITIATED BY DEACTIVATION AND SUBSEQUENT ACTIVATION
H31:	PEN <ltg>-<ltu>-<slot>-<cct> ACTIVATED
	CIRCUIT DATA LOADING INITIATED
H33:	xxxx xxxxx WAS ALREADY DEACTIVATED
H34:	ONTYPE=ANL IS TREATED LIKE ONTYPE=ACL
H35:	xxxx xxxxx WAS ALREADY PRE-BLOCKED
H36:	PEN <ltg>-<ltu>-<slot>-<cct> ACTIVATED - NOT READY (<status>)
	CIRCUIT DATA LOADING INITIATED
H37:	SIGNED OFF STATIONS WILL BE SWITCHED WITH ONTYPE=AUL, ALL OTHERS WITH ONTYPE=<ontype>
H38.	SIGNED OFF STATIONS WILL BE SWITCHED WITH OFFTYPE=DI, ALL OTHERS WITH OFFTYPE=<offtype>
H39:	API <stno> SIGNED ON TO PEN <ltg>-<ltu>-<slot>-<cct> xxx (<tsi>)
H40:	PEN @@-@@-@@@-@@@ BCHAN @@ ACTIVATED
H41:	PEN @@-@@-@@@@@@-@@@ BCHAN @@ ACTIVATED - NOT READY (@@@@@@@@@@@@@@@@@@@@@)
H42:	PEN @@-@@-@@@-@@@ BCHAN @@ DEACTIVATED
H43:	PEN @@-@@-@@@-@@@ BCHAN @@ PRE-BLOCKED (SOFTLOCK/BUSY)
H44:	PEN @@-@@-@@@-@@@ BCHAN @@ DEACTIVATED FOR LONG PERIOD (NEQ STATE)
H45:	THE DEACTIVATE JOB AFFECTS THE CURRENT REFERENCE CLOCK GENERATOR OF THE HICOM HOST SYSTEM (HHS). PLEASE ANSWER PARAMETER REFOFF YES . . . DEACTIVATE CURRENT REFERENCE CLOCK GENERATOR NO . . . . DO NOT DEACTIVATE CURRENT REFERENCE CLOCK GENERATOR
H46:	THE DEACTIVATE JOB AFFECTS THE LAST POSSIBLE REFERENCE CLOCK GENERATOR OF THE HICOM HOST SYSTEM (HHS). ******* THE SYSTEM CANNOT ADOPT A REFERENCE CLOCK ******** PLEASE ANSWER PARAMETER REFOFF YES . . . DEACTIVATE CURRENT REFERENCE CLOCK GENERATOR NO . . . . DO NOT DEACTIVATE CURRENT REFERENCE CLOCK GENERATOR
H47:	THE DEACTIVATE JOB AFFECTS THE CURRENT REFERENCE CLOCK GENERATOR OF THE ACCESS POINT (AP) @@. PLEASE ANSWER PARAMETER REFOFF YES. . . . DEACTIVATE CURRENT REFERENCE CLOCK GENERATOR NO . . . . DO NOT DEACTIVATE CURRENT REFERENCE CLOCK GENERATOR
H48:	THE DEACTIVATE JOB AFFECTS THE LAST POSSIBLE REFERENCE CLOCK GENERATOR OF THE ACCESS POINT (AP) @@. ******* THIS ACCESS POINT CANNOT ADOPT A REFERENCE CLOCK ******** PLEASE ANSWER PARAMETER REFOFF YES. . . . DEACTIVATE CURRENT REFERENCE CLOCK GENERATOR NO . . . . DO NOT DEACTIVATE CURRENT REFERENCE CLOCK GENERATOR
H49:	AT LEAST ONE B-CHANNEL WAS LONG TERM DEACTIVATED. TO MAKE SURE, THAT THE ACTIVATED B-CHANNELS GO INTO SERVICE, THE ASSOCIATED CIRCUIT MUST BE SWITCHED OFF AND ON WITH THE FOLLOWING COMMAND: RESTART-DSSU:PEN,@@-@@-@@@-@@@;

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.