84
DTIM1 - Device Handler Timers
The AMO DTIM1 is used to change, display and regenerate the timers for the device handler software complex.
For reasons of clarity, the timers are divided into the following categories:
•
ALTA
Timers for Austrian branch line (alternate route)
•
CO
Timers for central office trunk calls
•
DIGITE
Timers for DIGITE
The parameters ..ON and ..OFF are only valid for AUXDIGI (former DIGI260). The remaining parameters are also valid for Optiset/OptiPoint500.
The calling timers for the Optiset/OptiPoint device family are administrated with AMO
PTIME
TYPE=SLMA.
•
EXPTONE
Timers for Expensive route tone supervision
•
MFCDID
Timers for MFC indialing and test program
•
MTLC
Timers for the main-PABX set
•
STN
Timers for stations in general
•
TCOM
Timers for the adapter set for special equipment
(e.g. CC, dictation equipment)
•
TIE
Timers for inter-PABX calls
All the tables processed with this AMO are initialized in the database, thus making the ADD action of the AMO superfluous.
OpenScape 4000 V11, Volume 1: AMO Descriptions, Service Documentation, Issue 6
, ID:
P31003H31A0S107067620
©
05/2026
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.