84.3.1 CHANGE-DTIM1


Command Code	Parameter
CHANGE-DTIM1	\|TYPEDH=ALTA,OVR=<number>;

	\|TYPEDH=CO, {RESZO=<number>,RESZI=<number>
	,SETUPULS=<number>,CYCSET=<number>
	,DSUPVOP=<number>,TRACCO=<number>
	,WANN1=<number>,DANN1=<number>
	,WANN2=<number>,DANN2=<number>
	,DITR=<number>,PEODMS=<number>};

	\|TYPEDH=DIGITE, {NORMON=<number>,NORMOFF=<number>
	,CO1ON=<number>,COOFF1=<number>
	,CO2ON=<number>,COOFF2=<number>
	,SR1ON=<number>,SR1OFF=<number>
	,SR21ON=<number>,SR21OFF=<number>
	,SR22ON=<number>,SR22OFF=<number>
	,MTON=<number>,MTOFF=<number>
	,VCTONE=<number>,DITS1=<number>
	,DD1NTS=<number>,DD2NTS=<number>
	,DD1TS=<number>,DIALPAU=<number>
	,BURST=<number>,DISDEL=<number>
	,DITL1=<number>,VCHATONE=<number>
	,VCHAPAU=<number>,DIALIDLE=<number>
	,SVCMENU=<number,HWTEST=<number>
	,INITREQ=<number>,CTPRESEL=<number>
	,TINT1=<number>,DISPNEG=<number>
	,VWKONFMB=<number>};

	\|TYPEDH=EXPTONE,LCRET=<number>,LCRADVT=<number>;

	\|TYPEDH=MTLC, {FEEDSUPV=<number>,RLSA=<number>
	,RLSB=<number>,PREDIAL=<number>
	,STADIAL=<number>,EODBSY=<number>
	,LOOPACK=<number>,REMBLK=<number>
	,LRSUPV=<number>,RESZ=<number>
	,MINGR=<number>,OVRSEP=<number>
	,BTONE=<number>,SIGDEL=<number>
	,SECDT=<number>,LOOPIN=<number>
	,STADEL=<number>,EOD=<number>
	,EODACK=<number>};

	\|TYPEDH=MFCDID, {RNG=<number>,BUSY=<number>
	,TSUPV1=<number>,TSUPV2=<number>
	,TSUPV3=<number>,TSUPV4=<number>
	,TSUPV5=<number>,DSUPVG=<number>
	,RBANSW=<number>,WAITDTMF=<number>};
	,EODDEL=<number>,DTDEL=<number>};

	\|TYPEDH=STN,DTONE=<number>;

	\|TYPEDH=TCOM, {LASUPV1=<number>,LASUPV2=<number>
	,LASUPV3=<number>,LASUPV4=<number>
	,LASUPV5=<number>,CCMED1=<number>
	,CCMED2=<number>,CCSTAD=<number>
	,RLSPUL=<number>,RLSGRD=<number>
	,CCMEOD1=<number>,CCMEOD2=<number>
	,RASTA=<number>,RECAMDLY=<number>
	,RATX=<number>,SZACK1=<number>
	,SZACK2=<number>,WFIRST=<number>
	,WNEXT=<number>};

	\|TYPEDH=TIE, {RLSC1=<number>,RLSC2=<number>
	,SZSUPV=<number>,BTSUPV=<number>
	,REMBLKAC=<number>,PAUDIAL=<number>
	,PTNRSUPV=<number>,RESET1=<number>
	,RESET2=<number>,RESET3=<number>
	,RESET4=<number>,RESET5=<number>
	,SZAT=<number>,RLSSUPV=<number>
	,TEST1=<number>,TEST2=<number>
	,CTLSTST1=<number>,CTLSTST2=<number>
	,CTLSTST3=<number>,RESTRTNA=<number>};

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.