87 DUP - Duplication of mass storage devices


Restrictions	AMO Functions	Error Messages and Advisories
Interrelationships	Parameter Description

The AMO DUP is used for duplicating a hard disk (HD), magneto-optical disk (MO) or compact flash card (CF) offline.

Requirements

Both devices must be deactivated (for an online duplication the command COPY-DDRSM can be used). Since format of modern devices is not more needed, the destination device does not be formatted.

Duplicating

Basically, the AMO DUP consists of two procedures, copying and (optional) verify.

By one order either the complete device or RMX partitions only can be duplicated. If an error occurs during duplication, the copy will be aborted. In this case the operator must restart the AMO DUP.

If the operator requests a comparison of the devices on completion of the duplication job (verify), the contents of the copied device will be compared track by track with the original. If an error occurs during comparison, the job will be aborted and the operator must restart the AMO DUP. In some cases, it may be necessary to replace the destination device.

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.