90.3.1 ADD-FAMUP

Creating the parameter list of the logical device unit (LDU) FAMUP or the selection table The branch parameter TYPE is used for distinguishing between the FAMUP parameter list and the AMO-command table.
When creating the parameter list, remember to state all the parameters to ensure that FAMUP will work properly.
By adding AMOCMD-stapel, till 50 AMO-commands (string maximum length = 74 char) can be created. These strings will be recieved by the usertask. The action ADD should be reserved for just a certain privileged group of users.

The parameter SUCCPROC/FAILPROC specifies the valid partner system for the LDU FAMUP.


	entry	destination
1	xx.NAME *	HTS
2	USR	NCC in PC MX
3	FTH	NCC in HICOM-ADS
4	FTX	NCC in the local HICOM-ADS

*) If the destination system is HTS, the complete post-processing procedure must be specified. This filename must have a two-character prefix (e.g. W9.). Validation of the parameter USERID, ACCOUNT and PASSWORD in relation to the destination system..


	USERID	ACCOUNT	PASSWORD
1	X	X	X
2	X	---	X
3	---	---	---
4	---	---	---

Those fields marked with an X are invalueted.

Procedure Overview


Command Code	Parameter
ADD-FAMUP	TYPE=LDU,
	,RUPSTT=<number>,RUPINT=<number>,FTSTT=<number>
	,SCNAME=<string>,USERID=<string>,ACCT=<string>
	,PASSWORD=<string>,SUCCPROC=<string>
	,FAILPROC=<string>;

	\|TYPE=AMOCMD,AMOCMD=<string>;

Examples

Creating the parameter list of the logical device unit FAMUP
Starting the AMO-stapel at 02.00 hours and at intervals of one day;
Starting file transfer one hour later at 03.00 hours
Name of the destination computer in the service center: N78H02 and LOGON ID of the destination computer in the service center: FBCLUDI
Account number: 52B42730
Password: C ’xxxxx’
Filename of the DO procedure after successful transmission: W9.FAMUP.SUCC
Filename of the DO procedure after unsuccessful transmission: W9.FAMUP.FAIL

Input:

ADD-FAMUP:LDU,02-00-01-01-1987,1,03-00,N78H02,FBCLUDI,52B42730,C’xxxxx’;
W9.FAMUP.SUCC,W9.FAMUP.FAIL;

Output:

ADD-FAMUP:LDU,02-00-01-01-1987,1,03-00,N78H02,FBCLUDI,52B42730,C’xxxxx’;
W9.FAMUP.SUCC,W9.FAMUP.FAIL;
H500: AMO FAMUP STARTED
AMO-FAMUP -... REMOTE ADMINISTRATION & MAINTENANCE UPDATE
ADD COMPLETED

Adding the AMO DATE in AMO-stapel

Input:

ADD-FAMUP:AMOCMD,“DISP-DATE;“;

Output:

ADD-FAMUP:AMOCMD,“DISP-DATE;“;
H500: AMO FAMUP STARTED
AMO-FAMUP -... REMOTE ADMINISTRATION & MAINTENANCE UPDATE
ADD COMPLETED

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.