92.2.2 DELETE-FBTN

Cancel the entries of the flag byte table or trunk number table.
If a trunk number table entry was cancelled, the remaining entries are resorted in ascending order.
1.
Cancellation of a flag bit in the flag byte table 1.
2.
Cancellation of a flag bit in the flag byte table 2.
3.
Cancellation of a CO trunk number assignment.
Procedure Overview
 
Command Code
Parameter
 
DELETE-FBTN
[TBL=FB1],[FLAGBYTE=<number>];
(1)
 
 
 
 
|[TBL=FB2],[FLAGBYTE=<number>];
(2)
 
 
 
 
|[TBL=TRKNO],LTG=<number>,LTU =<number>
(3)
 
,SLOT=<number>,CCT=<number>,BCHAN=<number>;
 
Example
1.
Cancel flag bit 1 in flag byte table 2.
Input:
DELETE-FBTN:TBL=FB2,FLAGBYTE=1;
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620
 © 09/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.