94.3.1 CHANGE-FEASU

Activating and deactivating features
By means of the function CHANGE FEASU features can be activated or deactivated. If the input for parameter ’TYPE’ is equal to ’A’, the specified features will be activated. If the input for parameter ’TYPE’ is equal to ’D’, the features will be deactivated.
There are pairs within the allowed values of parameter CM which form exclusive pairs, i.e. pairs of feature bits both of which may not be activated at one time. At present the values PININT and PINNW (internal PIN1 and network wide PIN) as well as the the values XFBACALL and XFBADIAL (Transfer before Answer from Call State and Transfer before Answer from Dial State) constitute such exclusive pairs.
Procedure Overview
 
Command Code
Parameter
CHANGE-FEASU
|TYPE=A,CM=<param>;
 
|TYPE=D,CM=<param>;
Examples
1.
The features central speed dialing, individual speed dialing, and hunting group are to be activated.
Input:
CHANGE-FEASU: TYPE=A,CM=SPDC&SPDCI&HTVCE;
2.
The features central speed dialing, individual speed dialing, and hunting group are to be deactivated.
Input:
CHANGE-FEASU: TYPE=D,CM=SPDC&SPDCI&HTVCE;
1
PIN: Personal Identification Number

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620
 © 09/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.