99.3.1
ADD-FTCSM
Depending on which branch parameter TTYPE is given, the following takes place :
1.
the network book data is added,
2.
the task book data is added,
3.
the file transfer is either activated (START), terminated (STOP) or executed (RUN).
Because there is no delete of the task book, it is possible to add though there are configurations existing. If there is no value of a parameter entered, the default value will be added.
Procedure Overview
Command Code
Parameter
ADD-FTCSM
[UNIT=<param>]
,TTYPE=NCF,NCFNO=<number>
,OSPTNR=<string>,HPID=<string>
,DPAPPL=<string>,FEPROC=<string>
,[DPTYPE=<param>];
|,TTYPE=FTTF,[RSTIME=<number>]
,[FILNAM=<string>],[TASKMAX=<number>]
,[TASKIN=<number>],[TASKOUT=<number>];
|,TTYPE=STATE,STATE=<param>;
Examples
1.
Add the parameters for the network book
Input:
ADD-FTCSM:A1,NCF,16,"EMSAPPL1","DVAPROZ1","DVAAPPL1","N78H02",BS2000;
2.
Add the parameters for the task book
Input:
ADD-FTCSM:A1,FTTF,8,":DBD:FTV1",4,3,2;
3.
Terminate the file transfer
Input:
ADD-FTCSM:A1,STATE,STOP;
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.