101.3.1 CHANGE-FUNCT

Changes the functions (switch settings).
If a parameter value is given for a certain switch during command input, this switch is set to the specified value, even if this value was already set.
If a switch position is skipped over during command input, the switch in question remains unchanged.
Note
•
Default during initialization:
Switch for subsystem UBGDAT and for CC/decoupled mode or "splitting mode" to OFF, Type of power supply to AC/DC without redundancy and all other switches to ON.
•
A check is made during switching of the RTOs for VMS and TCS as to whether the RTO in question is present.
•
If you changed the system language (parameter LANG) for terminal input/output, this change will only take effect after a soft restart of the ISP (EXECUTE-REST:UNIT,A1,SOFT,;). However, a soft restart is not required when changing the session-specific administration language (parameter SLANG)!
•
A change to the power supply type is done without checking to see if this type of power supply is present.
•
A change to the pfi type is done without checking to see if the PFI (power fail interrupt) is read on this switch.
•
A change of SS7 controller type is done without checking whether this controller is really attached.
•
The function "switch off logging of certain AMOs" is possible from Hipath V2.0 inclusively onward.
•
Procedure Overview.
 
Command Code
Parameter
CHANGE-FUNCT
[CMDECHO=<param>],[AMOOK=<param>],[AMOHDR=<param>]
 
,[SUSY=<param>],[RTOADS=<param>],[RTOTFS=<param>]
 
,[RTOVMS=<param>],[LANG=<param>],[SPLIT=<param>]
 
,[RETENT=<number>],[POWERSYS=<param>],[PFI=<param>]
 
,[SS7CTR=<param>],[SLANG=<param>],[REGIN=<param>]
 
,[REGKEY=<param>],[REGLEN=<param>]
 
,[LOGBKOFF=<number>],[CONFREST=<param>];
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620
 © 09/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.