102.3.2
CHANGE FUNSU
•
Setting the switch ’Load loadware from hard disc’.
The switch is set with the aid of a message to the central peripheral initialization task (
PIT ).
•
Setting the switch ’Load flash memory modules’.
The switch is set in the database immediately.
Note
Once the switch for ’Load loadware from hard disc’ has been set it cannot be unset.
Procedure Overview
Command Code
Parameter
CHANGE-FUNSU
PIT=LWLOAD;
|PIT=FLASH,[PARTNO=<param>],[FCTID=<param>],
[ACTION=<param>];
Examples
4.
Setting the switch ’Load loadware from HD’.
Input:
CHANGE-FUNSU:PIT=LWLOAD;
5.
Setting the switch ’Load flash memory modules’ for board Q2144-X with funftion identification 0 to ’load’.
Input:
CHANGE-FUNSU:PIT=FLASH,Q2144-X,0,LOAD;
6.
Reset the switch ’Load flash memory modules’ for all flash boards with the funftion identification 1.
Input:
CHANGE-FUNSU:PIT=FLASH,,1,RESET;
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.