102.3.3
EXEC FUNSU
Advising the RTO SWU about changed RTO control data.
The RTO is advised by a message sent to the interface task in the active base processor. Finally, acknowledgment from the main task of the unit concerned is sent back to the AMO. This must be done to activate the changes made by the action SET.
Procedure Overview
Command Code
Parameter
EXEC-FUNSU
UNIT=<param>;
Examples
1.
Advising the LTG1 (A half) of RTO changes.
Input:
EXEC-FUNSU:GP1A;
Output:
H03: RTO OF GP1A IS STARTED WITH NEW DATA.
2.
Advising the BP (A half) of RTO changes.
Input:
EXEC-FUNSU:BPA;
Output:
H03: ROUTINE TEST OF PROCESSOR BPA WILL BE STOPPED
3.
Advising the LTG1 (B half) of RTO changes.
Input:
EXEC-FUNSU:GP1B;
Output:
H04: RTO OF GP1B IS NOT STARTED BECAUSE THERE IS NO FA START
AUTHORIZATION
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.