116.4
Parameter Description
ANS
Answer
Answer requested when parameter SEL=Y.
Type of Input
:
Single value
optional
Possible Values
:
Y
= output information
N
= do not output information
I
= interrupt output
C
= output information of all subsequent files
DIALOG
Dialog
Text to be output on the terminal by programs if the AMO is called.
Type of Input
:
Single value
optional
Possible Values
:
Y
= yes
Default Value
:
Y
FILENAME
File name of MML-CMD file (test file)
Name of file or area
Type of Input
:
Single value
mandatory
Possible Values
:
fully qualified or partly qualified
hard disk filename (max. 32 positions)
DAT- oder flash memory-filename (max. 32 positions)
cartridge or tape filename (max. 17 positions)
SEL
Selection mode
Should an inquiry be made for each file by using parameter ANS when a partially qualified file name is specified, or should the information for each file be output directly?
Type of Input
:
Single value
optional
Possible Values
:
Y
= yes, inquiry by parameter ANS
N
= no, no inquiry
Default Value
:
N
TYPE
Type of information and amount
Type of Input
:
Single value
mandatory
Possible Values
:
S
= short
M
= medium
L
= large
UNIT
Functional system unit i.e. server code
Type of Input
:
Single value
optional
Possible Values
:
A1
= Administration and Data Server (ADS)
Default Value
:
A1
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.