117.3.1
START-INIT
If there is an additional partition (e.g. Linux) on the disk, the user have to confirm before the partition will be deleted. This question could be switched off by using the parameter WARN.
If an area is reserved by an external application, the initialization will be rejected.
Note: If after a successful initialization of an MO the disk cannot be removed, the problem can be solved by deactivating the MO with AMO
DSSM
.
Procedure Overview
Command Code
Parameter
START-INIT
[UNIT=<param>],DEVNAME=<string>
,[MAXFILE=<number>],[WARN=<param>],[ANS=<param>];
Examples
1.
Initialize the second user area on the HD at controller 1
Input:
START-INIT:A1,":A1H1F:";
2.
Initialize all user areas on the HD on controller 1, which have not yet been initialized.
Input:
START-INIT:,":A1H11:";
3.
Initialize areas G, H and I on the HD on controller 1 of the ADS.
Input:
START-INIT:A1,A1H1G&A1H1H&A1H1I;
4.
Initialize area G on the HD on controller 4 with 5000 file nodes.
Input:
START-INIT:A1,V1H4G,5000;
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.