118.3 System Overview

From Hicom E V3.0 onward the JOB Task on ADP provides ONLY for DMS ( Domain Mangement System ) the entry point to execute HICOM AM-Batch files ( the integrated LINUX will not be delivered any more ) .

Short Description

–

The JOB-Task receives messages from DMS containing MML-Batch Jobs via FT-SINIX - FT-HICOM.

–

Data concerning the received Batch Job are entered into the JOB Tab and in case of a periodical job into the CRON Tab.

–

In case of an immediate Batch Job the JOB Task triggers an immediate execution of the Batch Job by the BATCH Task.

–

In case of a periodical Batch Job the CRON Task triggers a periodical ( according to the time stamp contained in the CRON Tab entry ) execution of the Batch Job by the BATCH-Task.

–

After an execution of a Batch Job by the BATCH Task the JOB-Task receives a protocol from the Batch Task. This protocol is forwarded via FT-HICOM - FT-SINIX to the DMS application.

–

If the execution mode of the Batch Job is “O” .... once or “I” .... immediate the corresponding entry of the Batch Job in the JOB-Tab is deleted by the JOB Task immediately after a successful execution of the Batch Job by the BATCH Task.

–

Periodical Batch Jobs can either be deleted by a DELETE ORDER from the DMS application or by a DELETE COMMAND via AMO JOB.

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.