120.2.3
RENAME-KDEV
Change an existing name and/or an ORG unit to a new, non-existent name or to a new ORG level.
Procedure Overview
Command Code
Parameters
RENAME-KDEV
IDOLD=<param>,OLDNAME=<string>
,{(min1)IDNEW=<param>,NEWNAME=<string>};
Both old parameters can be renamed to a single command, but either only IDOLD or only OLDNAME can be changed.
Stations and PINs can not be renamed.
For reasons related to administration, the name PPCF can not be renamed.
Examples
These refer to the customer file shown at the beginning.
1.
The name is to be changed. It must be noted that the group parameter is not to be entered, but the space for the parameter must be kept free (2 commas). IDNEW may be entered, but must correspond to the original identification.
Change the name of ORG unit "EA21" to "EA11".
Input:
RENAME-KDEV:ORG,EA21,,EA11;
2.
Change the ORG level. The group parameter "NEWNAME" need not be given.
Change the ORG level for ORG unit "EA2" to "ORG3".
Input:
RENAME-KDEV:ORG,EA2,ORG3;
3.
Rename the ORG level and the name. Both group parameters IDNEW and NEWNAME are required in this case.
Rename the ORG level for ORG unit "EA22" to "ORG2" and the name to "EA33".
Input:
RENAME-KDEV:ORG,EA22,ORG2,EA33;
Following execution of the procedures:
Structure of the customer file in output form
ENTRIES FOR ORG PPCF 8 .7 .1999
(1) EA (3) EA11 (T) 103
(1) " (3) " (T) 105
(1) " (2) EA33
(1) " (2) EA1 (3) EA01 (T) 109
(1) " (2) " (3) " (T) 111
(1) " (3) EA2
(1) " (2) EA3 (P) 117
12 ENTRIES IN CDR CUSTOMER FILE (PPCF)
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.
