123.3.1
ADD-KNFOR
This command allows you to enter a specific TONIN/TONOUT, SCRE, SENDCALL, SENDCONN und OVRDCAT into the node format table for a destination node number in a numbering plan (NPI =PRIVATE or ISDN).
Procedure overview
Command Code
Parameter
ADD-KNFOR
DNNO=<number>
|,NPI=ISDN,{(min=1) TONIN=<param>,TONOUT=<param>}
,[SCRE=<param>],[SENDCALL=<param>],[SENDCONN=<param>]
,[OVRDCAT=<param>],[ERROPT=<param>];
|,NPI=PRIVATE,{(min=1) TONIN=<param>,TONOUT=<param>}
,[SCRE=<param>],[SENDCALL=<param>],[SENDCONN=<param>]
,[OVRDCAT=<param>],[ERROPT=<param>];
Examples
1.
Add a 3-level destination node number for the ISDN numbering plan.
Input:
ADD-KNFOR:DNNO=3-1-20,NPI=ISDN,TONOUT=NATIONAL,SCRE=USERNSCR;
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.