123.4 Parameter description


DNNO	Destination virtual node number
	Type of input:		1 to 3 single values, concatenated with -, mandatory (CHANGE, ADD, DELETE) optional (DISPLAY, REGENERATE)
	Possible values:		Numeric, 0-999 The 3 single values are: Level0: 0-999 (value on the right) Level1: 0-253 (value in the middle) Level2: 0-29 (value on the left) Example: 29-253-999
	Default value	:	All destination node numbers entered for an NPI

ERROPT	Option, how to handle the error situation, that the calling number cannot be converted to the configured TONOUT format
	Type of input	:	Single value, optional (ADD),
			Group member, min.1 (CHANGE)
	Possible values:	:	IGNOR	Configured TONOUT ignored in error case, i.e. the TON of the calling number is only overwritten by TONOUT if the calling number can be converted to the desired TONOUT format
			DOMIN	Configured TONOUT dominates in error case, i.e. the TON of the calling number is always overwritten by TONOUT, even if the calling number cannot be converted to the desired format
			IMPL	Implicit station number in error case, i.e. if the calling number cannot be converted to the desired TONOUT format, an implicit station number (with prefixes, TON=UNKNOWN) is sent
	Default value	:	IGNOR	For ADD

NPI	Numbering plan identifier Term from ETSI Standard - identifies the particular numbering plan.
	Type of input:		1 to 2 single values, concatenated with &, optional (DISPLAY, DELETE, REGENERATE)
			Single value, mandatory (CHANGE, ADD)
	Possible values:		ISDN	ETSI-E.164 ISDN numbering plan
			PRIVATE	ETSI-E.189 Private numbering plan
	Default value		ISDN&PRIVATE

OVRDCAT	Override Category Controls the presentation of restricted numbers. (Presentation Indicator (PI) = RESTRICTED)
	Type of input:		Single value, optional (ADD)
			Group member, min.1 (CHANGE)
	Possible values:		YES	Presentation of a restricted Calling/Connected number
			NO	No presentation of a restricted Calling/Connected number (the number stays restricted)
	Default value		YES

SCRE	Screening Indicator Term from ETSI Standard - check attribute for “calling number”.
	Type of input:		Single value, optional (ADD)
			Group member, min.1 (CHANGE)
	Possible values:		NETWPROV	Network provided number
			TRANSP	Transparent - screening indicator remains
			USERNSCR	Number not screened by USER
			USERVF	Number verification by USER failed
			USERVP	Number verification by USER passed
	Default value		NOTDEF

SENDCALL	Send Calling Number
	Type of input:		Single value, optional (ADD)
			Group member, min.1 (CHANGE)
	Possible values:		SEND0	send no number
			SEND1	send one number
			SEND2	send two numbers (Calling and Calling Node)
	Default value		SEND1

SENDCONN	Send Connected Number
	Type of input:		Single value, optional (ADD)
			Group member, min.1 (CHANGE)
	Possible values:		SEND0	send no number
			SEND1	send one number
	Default value		SEND1

TONIN	TON (Type Of Number, Term from ETSI Standard) of incoming end traffic. The entry determines the format of the displayed calling number within the own virtual nodes.
	Type of Input	:	Group member, min.1
	Possible Values	:	INTERNAT	International number (permitted for NPI=ISDN)
			INTERPRE	International number with prefix (permitted for NPI=ISDN)
			LEVEL1	Level 1 regional number (permitted for NPI=PRIVATE)
			LEVEL2	Level 2 regional number (permitted for NPI=PRIVATE)
			LOCAL	Local subscriber number (permitted for NPI=PRIVATE)
			NATIONAL	National number (permitted for NPI=ISDN)
			NATIOPRE	National number with prefix (permitted for NPI=ISDN)
			SUBSCR	Local subscriber number (permitted for NPI=ISDN)
			UNKNOWN	Implicit numbers
			RESET	only possible for CHANGE, resets the entry to basic initialization value

TONOUT	TON (Type Of Number, Term from ETSI Standard) of outgoing traffic. The entry determines the format of the calling number sent to foreign virtual destination nodes.
	Type of Input	:	Group member, min.1
	Possible Values	:	INTERNAT	International number (permitted for NPI=ISDN)
			INTERPRE	International number with prefix (permitted for NPI=ISDN)
			LEVEL1	Level 1 regional number (permitted for NPI=PRIVATE)
			LEVEL2	Level 2 regional number (permitted for NPI=PRIVATE)
			LOCAL	Local subscriber number (permitted for NPI=PRIVATE)
			NATIONAL	National number (permitted for NPI=ISDN)
			NATIOPRE	National number with prefix (permitted for NPI=ISDN)
			SUBSCR	Local subscriber number (permitted for NPI=ISDN)
			UNKNOWN	Implicit numbers
			RESET	only possible for CHANGE, resets the entry to basic initialization value

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.