125.2.2.3 Standard configuration

•

For NPI=ISDN, PRIVATE Format Depending Modification is to be configured, using the AMO’s KNFOR, KNPRE, TDCSU and KNDEF.

•

The logical node OWN is replaced by all own virtual node numbers as configured by AMO KNDEF, TYPE=OWN.

•

For NPI=UNKNOWN in most cases a standard configuration is sufficient using KNMAT logical nodes. For example, in a 1 level open numbered network, a node with node/region code 911 (corresponds to station numbers 911xxxxx, where xxxxx means a local station number) should be configured with:

Input:

CHANGE-KNMAT:UNKNOWN,0,,OWN,,ROW,,OUT,911; /* level 0 node code = 911 */
CHANGE-KNMAT:UNKNOWN,0,,ROW,,OWN,,IN&TRANSI,,911;

Output, if for example only 1 own virtual node (=15) is configured in KNDEF-Table (message 1 for command 1 and message 2 for command 2)

H08: ONNOL=OWN WAS CONVERTED ACCORDING TO KNDEF-TABLE INTO ONNO=15.
H08: DNNOL=OWN WAS CONVERTED ACCORDING TO KNDEF-TABLE INTO DNNO=15.

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.