125.4.3 REGENERATE-KNMAT

Displays denied connections or connections with station number modifications in the form of change commands.

If no parameter is specified, all denied connections and all connections with station number modifications will be regenerated.

Procedure overview


Command code	Parameters
REGENERATE-KNMAT	[NPI=<param>],[LEVEL=<number>]
	,{ONNO=<number>,ONNOL=<param>}
	,{DNNO=<number>,DNNOL=<param>}
	,[MODE=<param>]

Example

List all change commands which affect originating nodes with the numbers 90 to 99 and destination nodes 60 to 85 on level 0.

Input:

REGENERATE-KNMAT:,0,90&&99,,60&&85;

Output:

CHA-KNMAT:ISDN,0,91,,84,,D,,,;
CHA-KNMAT:ISDN,0,99,,60,,D,ALL,722,;
CHA-KNMAT: PRIVATE,0,91,,84,,D,,,;
CHA-KNMAT:PRIVATE,0,95,,60&&63&70,,A,OUT,211,;
CHA-KNMAT:UNKNOWN,0,91,,80,,A,IN&TRANSH,91,;
CHA-KNMAT:UNKNOWN,0,91,,84,,D,,,;
CHA-KNMAT:UNKNOWN,0,91,,85,,A,NOMOD,91,40;
CHA-KNMAT:UNKNOWN,0,95,,81,,A,ALL,,50;
CHA-KNMAT:UNKNOWN,0,95,,85,,A,ALL,95,50;

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.