125.6.2 Advisories


H01:	NO ENTRY WITH THE REQUIRED ATTRIBUTES AVAILABLE
H02:	NOT ALL REQUESTED ONNO ARE DISPLAYED
H04:	NPI IS NOT RELEVANT TO DENY / ALLOW CONNECTIONS. THE PARAMETER WAS IGNORED FOR THIS FUNCTION.
H05:	MODCON IS ONLY VALID IN COMBINATION WITH NUMBER EXTENSION OR REDUCTION. MODCON WAS IGNORED WHERE NO NUMBER EXTENSION OR REDUCTION WAS FOUND EITHER IN COMMAND OR IN MODIFICATION MATRIX.
H06:	NPI IS NOT RELEVANT TO DENY CONNECTIONS. THE PARAMETER IS NOT IGNORED FOR OUTPUT RESTRICTIONS.
H07:	THE LOGICAL NODE CDR BECOMES ONLY EFFECTIVE AS DESTINATION NODE FOR NPI=UNKNOWN.
H08:	<iiiii>=OWN WAS CONVERTED ACCORDING TO KNDEF-TABLE INTO <fffff>=<ggg>.
H09:	<iiiii>=OWN WAS CONVERTED ACCORDING TO KNDEF-TABLE INTO <fffff>=<ggg>.
	EXTRACTED NUMBER: <zzzz>=<nnnnnn> (SKIP DIGITS HAVE BEEN CONSIDERED)
H10:	PLEASE NOTE THAT ENTRIES, WHICH ARE EXTRACTED FROM KNDEF-TABLE, ARE NOT AUTOMATICALLY ADAPTED, IF KNDEF-TABLE IS CHANGED.
H11:	FOR EXTRACTING OF NUMEXT/NUMRED FROM KNDEF-TABLE ONLY <iiiii>=OWN WAS CONSIDERED. OTHER <ttttttttttttttttt> HAVE BEEN IGNORED.

Output texts:


<fffff>:	ONNO or DNNO
<ggg>:	Node / region number
<iiiii>:	ONNOL or DNNOL
<zzzzzz>:	NUMEXT or NUMRED
<nnnnnn>:	Node access code from KNDEF-Table
<ttttttttttttttttt>:	ORIGINATING NODES or DESTINATION NODES

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.