128.2.5 DISPLAY-LANC

Configured entries can be output for each table individually or for all tables as a whole. Moreover, entering the level of display makes it possible to limit the output range. If you specify the MOD value, only those entries are output that have been changed since the last load job. In the default configuration, all configured entries are output.

You can search for IP addresses in the IPROUTE, ISDNTERM, FIREIP and FIREMAC tables and output the matching entries; if you specify a network mask, the search can also be performed on a network-specific basis.

By specifying TABTYPE=ALL, the global parameter table and the network interface table are output, regardless of subsequent parameters.

The WAML board has 2 Ethernet interfaces, that’s why 2 MAC addresses also exist and these can be output by means of the AMO LANC. This information (2 MAC addresses) is output even in the case when ’TABTYPE=ALL’ is selected.

If a table is empty, the message H01 is output. If none of the existing table elements matches the criteria in the AMO command, the message H04 is displayed.

When the message H07 is output, it explicitly informs the user that WAML configuration data has been changed since the last load job and that the WAML must be dynamically loaded in order for these changes to become valid.

Procedure overview


Command code	Parameter
DISPLAY-LANC	[LTG=<number>],LTU=<number>,SLOT=<number>
	,TABTYPE=GLOBAL,[DISPLV=<param>];	(1)

	\|,TABTYPE=NETWORK,[NETNAME=<param>],[DISPLV=<param>];	(2)

	\|,TABTYPE=IPROUTE,[IPADDR=<string>],[IPNMASK=<string>]	(3)
	,[DISPLV=<param>];

	\|,TABTYPE=ISDNTERM,[IPADDR=<string>]	(4)
	,[IPNMASK=<string>],[DISPLV=<param>];

	\|,TABTYPE=FIREIP,[IPADDR=<string>],[IPNMASK=<string>]	(5)
	,[DISPLV=<param>];

	\|,TABTYPE=FIREMAC,[IPADDR=<string>],[IPNMASK=<string>]	(6)
	,[DISPLV=<param>];

	\|,TABTYPE=MACADDR;	(7)

	\|,TABTYPE=ALL,[IPADDR=<string>],[IPNMASK=<string>]	(8)
	,[DISPLV=<param>];

Examples

Output the global parameter table if the data has been changed since the last load job.

Input:

DISP-LANC:1,2,25,GLOBAL,MOD;

Output:

+----------------------------------------------------------+------------+
| WAML : LTG = 1 LTU = 2 SLOT = 25 | SRCGRP: 1 |
+----------------------------------------------------------+------------+

+-----------------------------------------------------------------------+
| |
| GLOBAL PARAMETER |
| ================ |
| |
| WAML STATION NUMBER: 47211 |
| NUMBER OF B-CHANNELS: 16 |
| BYTERATE: 100 KB/SEC. PACKAGE RATE: 1000 PER SEC.|
| CALL RETRIES: 5 CALL PAUSE: 5 SEC. |
| HIGH WATER MARK: 90 % ADD CHANNEL TIMER: 40 SEC. |
| LOW WATER MARK: 65 % SUB CHANNEL TIMER: 30 SEC. |
| TRACE-LEVEL: 3 FIREWALL: SCRIP ISDN |
| LAN HW-INTERFACE: WESTERN ACTIVE-FLAGS: ATLLAN EXTLAN1 ISDN |
| ADP ACCESS VIA ISDN INTERFACES: PROXY |
| ADP ACCESS VIA EXTERNAL LAN INTERFACES: PROXY |
+-----------------------------------------------------------------------+

H07: CHANGED CONFIGURATION DATA AVAILABLE - LOAD WAML BOARD WITH COMMAND
’EXEC-LANC’ REQUIRED.

Output network interfaces added to the network interface table.

Input:

DISP-LANC:,2,25,NETWORK;

Output:

Output all entries added to the IP routing table.

Input:

DISP-LANC:1,2,25,IPROUTE;

Output:

+----------------------------------------------------------+------------+
| WAML : LTG = 1 LTU = 2 SLOT = 25 | SRCGRP: 1 |
+----------------------------------------------------------+------------+

+--------------------------------------------------------------+
| |
| IP - ROUTING TABLE |
| ================== |
| |
| |DESTI-| | IP-ADDRESS OF |
| IP-ADDRESS |NATION| IP-NETMASK | NEXT ROUTER |
|-----------------+------+-----------------+-------------------|
| 192.168.003.003 | HOST | 255.255.255.255 | 140.001.000.003 |
| 192.168.002.003 | NET | 255.255.255.000 | 140.001.000.002 |
+--------------------------------------------------------------+
H07: CHANGED CONFIGURATION DATA AVAILABLE - LOAD WAML BOARD WITH COMMAND
’EXEC-LANC’ REQUIRED.

Output all entries added to the ISDN remote terminal table that have been changed since the last load job.

Input:

DISP-LANC:1,2,25,ISDNTERM,,,MOD;

Output:

+----------------------------------------------------------+------------+
| WAML : LTG = 1 LTU = 2 SLOT = 25 | SRCGRP: 1 |
+----------------------------------------------------------+------------+

+-----------------------------------------------------------------------------+
| |
| ISDN REMOTE TERMINAL TABLE |
| ========================== |
| |
| |SHORT|B-CHANNELS | BITRATE | | | |
| |HOLD |FOR CHANNEL| ON |CALL| | |
| IP-ADDRESS |TIME | BUNDLING |B-CHANNEL|BACK| STATION NUMBER |USAGE |
|---------------+-----+-----------+---------+----+----------------------+-----|
|192.168.255.064| 30 | 1 | 64KBIT | N | 036147931|IN OUT|
| | | | | | 03742250868|IN |
+-----------------------------------------------------------------------------+
H07: CHANGED CONFIGURATION DATA AVAILABLE - LOAD WAML BOARD WITH COMMAND
’EXEC-LANC’ REQUIRED.

Output all entries added to the firewall IP address table.

Input:

DISP-LANC:1,2,25,FIREIP;

Output:

+----------------------------------------------------------+------------+
| WAML : LTG = 1 LTU = 2 SLOT = 25 | SRCGRP: 1 |
+----------------------------------------------------------+------------+

+-------------------------------------------------+
| |
| FIREWALL IP-ADDRESS TABLE |
| ========================= |
| |
| IP-ADDRESS | NETWORK ACCESS RIGHTS |
|-----------------+-------------------------------|
| 192.168.001.003 | ATLLAN EXTLAN1 |
| 140.001.000.009 | ATLLAN ISDN |
| 140.001.000.005 | ATLLAN EXTLAN1 INTLAN ISDN |
+-------------------------------------------------+
H07: CHANGED CONFIGURATION DATA AVAILABLE - LOAD WAML BOARD WITH COMMAND
’EXEC-LANC’ REQUIRED.

Output the entry with IP address 140.1.0.10 in the firewall MAC address table.

Input:

DISP-LANC:1,2,25,FIREMAC,140.1.0.10;

Output:

Display the WAML MAC addresses.

Input:

DISP-LANC:1,2,25,MACADDR;

Output:

Output all entries in the WAML configuration tables that have been changed since the last load job.

Input:

DISP-LANC:,2,25,ALL,,,MOD;

Output:

The table contents are output in the following order:


GLOBAL	- Global parameter table
NETWORK	- Network interface table
IPROUTE	- IP routing table
ISDNTERM	- ISDN remote terminal table
FIREIP	- Firewall IP address table
FIREMAC	- Firewall MAC address table
MACADDR	- Display MAC address of WAML board

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.