129.3.1
ADD-LAUTH
Add a new LCR authorisation code to an ITR group.
The authorisation code to be added is specified by the ITR and INDEX parameters.
The authorisation code may be entered in either human readable or encrypted form, specified by the FORMAT parameter. The encrypted format is used by the regenerate command.
The authorisation code is stored in encrypted form on the system, which can observed by the regenerate command.
Remarks:
–
An authorisation code can only be added if a code is not already configured for the given ITR and INDEX.
–
Users should use NORMAL branch to create new entries.
–
ENCRYPT branch is only for regeneration of the system using the REGEN output.
Procedure Overview
Command Code
Parameter
ADD-LAUTH
ITR=<number>,INDEX=<number>,FORMAT=NORMAL/ENCRYPT;
|FORMAT=NORMAL,CODE=<string>;
|FORMAT=ENCRYPT,CRYPCODE=<string>;
Examples
1.
To add a normal authorisation code to ITR group number 4.
Input:
ADD-LAUTH:4,1,NORMAL,2788991;
2.
To add an encrypted authorisation code to ITR group number 4.
Input:
ADD-LAUTH:4,1,ENCRYPT,72JQD2520J;
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.