130.3.1 ADD-LCSM

There don't exist ASYNCH - or V24 - Lines in a Hipath 4000 V2.0 .


Command Code	Parameter
ADD-LCSM	[UNIT=<param>]
	,MLNTYPE=ASYNC,TYPENO=<number>,BAUD=<number>
	,LEN=<number>,STOPLEN=<param>,TRNSCLK=<param>
	,RCLK=<param>;

	\|,MLNTYPE=V24,TYPENO=<number>,NORM=<param>
	,OPTYPE=<param>,SPEED=<param>,CLK=<param>
	,TIME=<number>,LNTYPE=<param>;

Example

Creation of line data for administration and data module 1 for an asynchronous line.

Input:

ADD-LCSM:A1,ASYNC,1,4800,7,SL1.5,INT,EXT;

Note

The module for the physical line must be present.

Note

If the length of stop has value SL1.5 the value SL1.5 is mapped internally to the value SL1.

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.