130.3.2
CHANGE-LCSM
Restriction:
There don't exist ASYNCH - or V24 - Lines in a Hipath 4000 V2.0 .
Procedure Overview
Command Code
Parameter
CHANGE-LCSM
[UNIT=<param>]
,MLNTYPE=ASYNC,TYPENO=<param>,[BAUD=<number>]
,[LEN=<number>],[STOPLEN=<param>]
,[TRNSCLK=<param>],[RCLK];
\,MLNTYPE=V24,TYPENO=<param>,[NORM=<param>]
,[OPTYPE=<param>],[SPEED=<param>]
,[CLK=<param>],[TIME=<number>]
,[LNTYPE=<param>];
Example
Creation of line data for the administration and data module 1 for an asynchronous line.
Input:
CHANGE-LCSM:A1,ASYNC,1,4800,5,SL1,INT,INT;
Note
If the length of stop has value SL1.5 the value SL1.5 is mapped internally to the value SL1.
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.