131.2.4
DISPLAY-LDAT
In general, LCR routes can be displayed either individually according to the purpose for which they are used, e.g.
•
LCR routes for LCR
(TYP=LCR)
•
LCR routes for LCR with closed numbering
(TYP=NWLCR)
or independently of it (TYPE=ALL includes TYPE=LCR and TYPE=NWLCR).
For all LCR/NWLCR routes, the data of all associated LCR route elements (LCR priority, trunk groups, outdial rule, LCR authorization) can be displayed (TYPE=LCR, NWLCR or ALL without specifying any further parameters).
For specific LCR/NWLCR routes, the data of all associated LCR route elements can be displayed (TYPE=LCR, NWLCR or ALL with parameter LROUTE).
However, it is also possible to display LCR/NWCLR routes in which one or several LCR route elements are assigned
specific trunk groups (parameter TGRP)
specific outdial rules (parameter ODR)
specific LCR authorizations (parameter LAUTH)
a specific Destination Node Number (parameter DNNO)
specific LCR attributes (parameter LATTR)
specific LDSR tables (parameter LDSRT)
specific Gateway Element (parameter GW)
Lower levels of an DNNO may be zero, in this case routes to all nodes of that level will be displayed.
The range of LCR routes and the service to be searched through can be limited (parameter LROUTE, LSVC). In this case, only those LCR routes will be output in which at least one element complies with the
search criteria.
The values which result of the ADD and CHANGE commands will be displayed. The SCHEDULES will be displayed as an asteriks (*) when unlocked, a dash (-) when locked and the letter E when marked as expensive.
LCR routes which are already assigned to a LCR dialling plan (AMO
LDPLN
) are marked with LDPLN in the fist line.
The field SERVICE INFO is written by AMOs
COP
,COT,COSSU,LODR,LWPAR,TAPRO and RICHT and is only displayed by AMO-LDAT.
Procedure Overview
Command Code
Parameter
DISPLAY-LDAT
TYPE= LCR | NWLCR | ALL
, [LROUTE=<number>], [LSVC=<param], [TGRP=<number>]
, [ODR=<number>], [LAUTH=<number>]
, [DNNO=<number>], [LATTR=<param>]
, [LDSRT=<number>],[GW=<number>];
Examples
1.
Display all routes
Input:
DIS-LDAT:TYPE=ALL;
2.
Display all LCR routes
Input:
DIS-LDAT:TYPE=LCR;
3.
Display all networking LCR routes
Input:
DIS-LDAT:TYP=NWLCR;
4.
Display all LCR routes in which at least one route element uses trunk group 91.
Input:
DIS-LDAT:TYP=LCR,TGRP=91;
5.
Display all LCR routes in which at least one route element uses trunk group 72 with an outdial rule between 50 and 59.
Input:
DIS-LDAT:TYPE=LCR,TGRP=72,ODR=50&&59;
6.
Display all LCR routes in which at least one route element uses trunk group 91 with outdial rule 31 and LCR authorization 1.
Input:
DIS-LDAT:TYPE=LCR,TGRP=91,ODR=31,LAUTH=1;
7.
Display all LCR routes in which at least one route element uses LDSRT 5.
Input:
DIS-LDAT:TYPE=LCR,LDSRT=5;
8.
Display all LCR routes in which at least one route element uses the destination gateway entry GW = 1-8, where gateway number=1 and sector path number = 8.
Input:
DIS-LDAT:TYPE=LCR,GW=1-8;
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.