132 LDB - Load Data Base from Hard Disk


Restrictions	Functions of the AMO	Error Messages and Advisories
Interrelationships	Parameter Description

The AMO LDB enables the operator to reload the database of a hardware module (SWU, ADS) from hard disk. This is done by setting the database inconsistency bit in the boot communications area (BCA) of the controller concerned. The operator can then initiate a parametric load sequence by means of a hard restart, or with the aid of the AMO REST (Restart of a Functional System Unit).

NOTE: If the SWU is operating in duplex mode a hard restart activates the standby prozessor. The database can only be completely reloaded by calling the AMO LDB twice.

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.