133.2.3 DELETE-LDPLN

The DELETE function is used to remove assignment of dialplan number to dial plan in a pool. Dialing plan numbers only without dialing patterns can be deleted.

The DELETE function is used to delete one or more LCR digit patterns from the LCR dialing plan.

The LCR digit patterns to be deleted are identified either via LCR digit pattern (parameter LDP) or their assigned numbers, which can be found with DISPLAY (parameter LDPNO).

Procedure Overview


Command Code	Parameter
DELETE-LDPLN	LCRCONF=LCRADM,DIPLNUM=<number>;
DELETE-LDPLN	LCRCONF=LCRPATT,DIPLNUM=<number>, {(min1)LDPNO=<range>,LDP=<textstring>};

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.