134.2.4 REGEN-LDSRT

The following cases are valid:
1.
Regenerating all data.ADD commands for all LDSR tables (1-16) are regenerated.
2.
Regenerating all SDSs of all FDSs of one or more LDSRTs. A single value or a range for LDSRT is entered and add commands for these LDSRTs are regenerated.
3.
Regenerating all SDSs of one or more FDSs of one LDSRT. An LDSRT and a single value or a range for FDS is entered and the add commands of specified FDS and LDSRT are regenerated. In order to regenerate the FDS and associated SDSs, LDSRT must be entered before FDS.
4.
Regenerating one or more SDSs of one FDS of one LDSRT. An LDSRT, an FDS and a single value or range for SDS are entered. Add commands for the specified SDSs are regenerated. To regenerate SDS numbers, LDSRT and FDS must be entered before SDS.
Procedure Overview
 
Command Code
Parameter
REGENERATE-LDAT
[LDSRT=<number>],[FDS=<number>],[SDS=<number>];
Examples
1.
Case 1
Input:
REGEN-LDSRT;
Output:
ADD-LDSRT:1,068,6&70&710&7110;
ADD-LDSRT:1,312,4595690;
ADD-LDSRT:2,18678,;
ADD-LDSRT:6,300,21&22&23&24&25&26&27&28&29&30&31&32&33&34&35&36&37&38&39&40;
ADD-LDSRT:6,300,41&42&43&44&45&46&47&48&49;
2.
Case 2
Input:
REGEN-LDSRT:1&&4;
Output:
ADD-LDSRT:1,068,6&70&710&7110;
ADD-LDSRT:1,312,4595690;
ADD-LDSRT:2,18678,;
3.
Case 3
Input:
REGEN-LDSRT:1,068&312;
Output:
ADD-LDSRT:1,068,6&70&710&7110;
ADD-LDSRT:1,312,4595690;
4.
Case 4
Input:
REGEN-LDSRT:6,300,26&&39;
Output:
ADD-LDSRT:6,300,26&27&28&29&30&31&32&33&34&35&36&37&38&39;
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620
 © 09/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.