138.3.4 REGENENERATE-LODR

All existing outdial rules can be regenerated with their associated outdial rule commands (REGEN-LODR without parameters).

Specific outdial rules can be regenerated with their associated outdial rule commands (parameter ODR).

Procedure Overview


Command Code	Parameter
REGEN-LODR	[ODR=<range>];

EXAMPLE

Regenerate outdial rules 1 through 3 with their outdial rule commands.

Input:

REGEN-LODR:ODR=1&&3;

Output:

ADD-LODR:1,,,WAITANS,5;
ADD-LODR:1,,,OUTPULSE,1234567890123456789012;
ADD-LODR:1,,,PAUSE,3;
ADD-LODR:1,,,OUTPULSE,131;
ADD-LODR:1,,,ECHO,2;
ADD-LODR:1,,,DTMF;
ADD-LODR:1,,,END;
ADD-LODR:2,,,WAITANS,5;
ADD-LODR:2,,,OUTPULSE,131;
ADD-LODR:2,,,OUTCODE,1;
ADD-LODR:2,,,OUTCSN,1;
ADD-LODR:2,,,ECHOALL;
ADD-LODR:2,,,END;
ADD-LODR:3,,,WAITANS,5;
ADD-LODR:3,,,OUTPULSE,131;

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.