142.3.3 REGENERATE-LSCHD

Generate the list of CHANGE commands required to configure the LCR Schedule table for one or more ITR groups. In order to reduce the output REGENERATE will produce commands using an hour range where possible. The actual number of lines output will depend upon the amount of variation in the table.
Procedure Overview
 
Command Code
Parameter
REGENERATE-LSCHD
[ITR=<number>];
Example
Regenerate LCR Schedules for ITR group 10.
Input:
REGENERATE-LSCHD:ITR=10;
Output:
CHANGE-LSCHD:10,SUN,0&&16,C,0;
CHANGE-LSCHD:10,SUN,17&&22,B,0;
CHANGE-LSCHD:10,SUN,23,C,0;
CHANGE-LSCHD:10,MON,0&&7,C,0;
CHANGE-LSCHD:10,MON,8&&16,A,0;
CHANGE-LSCHD:10,MON,17&&22,B,0;
CHANGE-LSCHD:10,MON,23,C,0;
CHANGE-LSCHD:10,TUE,0&&7,C,0;
CHANGE-LSCHD:10,TUE,8&&16,A,0;
CHANGE-LSCHD:10,TUE,17&&22,B,0;
CHANGE-LSCHD:10,TUE,23,C,0;
CHANGE-LSCHD:10,WED,0&&7,C,0;
CHANGE-LSCHD:10,WED,8&&16,A,0;
CHANGE-LSCHD:10,WED,17&&22,B,0;
CHANGE-LSCHD:10,WED,23,C,0;
CHANGE-LSCHD:10,THU,0&&7,C,0;
CHANGE-LSCHD:10,THU,8&&16,A,0;
CHANGE-LSCHD:10,THU,17&&22,B,0;
CHANGE-LSCHD:10,THU,23,C,0;
CHANGE-LSCHD:10,FRI,0&&7,C,0;
CHANGE-LSCHD:10,FRI,8&&16,A,0;
CHANGE-LSCHD:10,FRI,17&&22,B,0;
CHANGE-LSCHD:10,FRI,23,C,0;
CHANGE-LSCHD:10,SAT,0&&23,C,0;
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620
 © 09/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.