145.3.3 DELETE-LWPAR

DELETE the assignment of a parameter block to a certain analog circuit type and initialize the block. DELETE is not necessary for the parameter blocks of digital modules.

Note

Before deleting a parameter block, the assignments for the circuits assigned for this block must be deleted or changed to a different block (use the AMO TACSU or TDCSU, parameter LWPAR).

The service information can be deleted by typing a blank as first character of parameter INFO

ADD-LWPAR:TYPE=<LWPAR-TYPE>,BLNO=<x>,INFO=’ ’; in case of analog blocks

CHANGE-LWPAR:TYPE=<LWPAR-TYPE>,BLNO=<x>,INFO=’ ’; in case of digital blocks

The deletion of a CDG or a TMD block results in resetting the block parameters to their default value.
The mapping tables of the CDG blocks can be deleted one by one using the function CHANGE.

Procedure Overview


Command Code	Parameter
DELETE-LWPAR	TYPE=ANALOG,BLNO=<number>;
	\|TYPE=CDG,BLNO=<number>;
	\|TYPE=TMD,
	\|TMDTYPE=TMDMOS,BLNO=<number>;
	\|TMDTYPE=TMDBOS,BLNO=<number>;

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.