145.3.5 COPY-LWPAR

Only the standard parameter blocks of type DIUS2, CDG and TMD resp. their country specific combinations (called variants) can be copied. Analog parameter blocks can not be copied.

For copying single blocks (TYPE=DIUS2/CDG/TMD) it must be specified by the help of parameter SOURCE whether

–

an existing block within the DB (from source to target position)

–

or a standard parameter block from HD to DB is to be copied.

The target block (parameter BLNONEW) will be overwritten in the copy process without precaution. As default value SOURCE=DB is assumed.

The country specific variants (TYPE=DIUS2VAR/CDGVAR) contain assignments which blocks have to be copied at once from HD to DB.

The standard parameter blocks on the HD to be copied are sored in the following data subsystems:

•

“:PDS:APSU/DSLWTM0”, “:PDS:APSU/DSLWT20” and “:PDS:APSU/DSLWCD0” for standard parameter blocks

•

“:PDS:APSU/DSLWT2V” and “:PDS:APSU/DSLWCDV” for country specific variants.

The contents of these data subsystems can not be modified by AMO LWPAR.

Procedure Overview


Command Code	Parameter
COPY-LWPAR	TYPE=DIUS2,BLNOOLD=<number>,[BLNONEW=<number>],
	[SOURCE=<param>];

	\|TYPE=CDG,BLNOOLD=<number>, [BLNONEW=<number>],
	[SOURCE=<param>];

	\|TYPE=TMD,
	\|TMDTYPE=TMDMOS,BLNOOLD=<number>,[BLNONEW=<number>,
	[SOURCE=<param>];
	\|TMDTYPE=TMDBOS,BLNOOLD=<number>,[BLNONEW=<number>,
	[SOURCE=<param>];

	\|TYPE=DIUS2VAR,VARNO=<number>;

	\|TYPE=CDGVAR,VARNO=<number>;

Note: the COPY command are not regenerated.
Only the actual DB state after executing the COPY function can be regenerated.

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.