145.3.6 REGENERATE-LWPAR

REGENERATE parameter blocks of a certain circuit type or all circuit types.
All 10 data blocks (0 to 9) are regenerated for TYPE=DIUS2.
All 6 data blocks (1 to 6) are regenerated for TYPE=DIUC.
For TYPE=CDG all data blocks are regenerated which deviate from the standard data base.
For analog circuit types, only those data blocks are regenerated which have been assigned to a circuit type, and of these only those block parameters are regenerated which deviate from the standard data base.

Procedure Overview


Command Code	Parameter
REGENERATE-LWPAR	[TYPE=<param>];

Example

Regenerate the parameter block 15.

Input:

REGEN-LWPAR:CDG;

Output:

CHANGE-LWPAR:CDG,15,CONF,213,,,,,,,,,,,,,,,,,,,,,,,,,,"TEST BLNO 15 CDG",,;

CHANGE-LWPAR:CDG,15,TIMER,5,,,,,,,,,,,,,,,,,,,,,;

CHANGE-LWPAR:CDG,15,MAPPING,LCOSVRRG,1&2&3&4,51&51&53&54;

CHANGE-LWPAR:CDG,15,MAPPING,TRGCBG,1&2&3&4,22&22&23&24;

CHANGE-LWPAR:CDG,15,MAPPING,DXTGITR,1&2&3&4,21&22&23&24,1,21;

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.