146.4 Parameter Description

ADINFO	Additional information
	Type of Input	:	Single value, optional
	Possible Values	:	0 - 99
			1 - 16 for STNCAT=INFO
	Default Value		0
ADREQ	Address request/retransmit signal(s)
	Number of request signals and request signals for SOCOTEL
	The CCITT-R2 standard allows the dialed number to be repeated with this code once the MFC signal exchange has begun (request last or penultimate signal from the central office/exchange).
	Type of Input	:	Single value, optional
	Possible Values	:	0 - 9, A - F, *, #, of max. 6 digits
	For SOCOTEL (MFCTYPB/MFCTYPF=SOCFB/SOCEB/SOCFF/SOCEF),
	at least 1 request signal must be set.
ANBEG	Begin position of A number in CPB
	Type of Input	:	Single value, optional
	Possible Values	:	0 - 44
	Default Value	:	0
	Type of Input	:	Single value, optional
ANEND	End position of A number in CPB
	Position for insertion of A number
	Type of Input	:	Single value, optional
	Possible Values	:	0 - 44
	Default Value	:	0
ANICAT	Ani category
	Type of input		single value, optional
	Possible values:		ANI1 ani kategorie 1 DB_MFC_ANI1
			ANI10 ani kategorie 10 DB_MFC_ANI10
			ANI2 ani kategorie 2 DB_MFC_ANI2
			ANI3 ani kategorie 3 DB_MFC_ANI3
			ANI4 ani kategorie 4 DB_MFC_ANI4
			ANI5 ani kategorie 5 DB_MFC_ANI5
			ANI6 ani kategorie 6 DB_MFC_ANI6
			ANI7 ani kategorie 7 DB_MFC_ANI7
			ANI8 ani kategorie 8 DB_MFC_ANI8
			ANI9 ani kategorie 9 DB_MFC_ANI9
			NULL no evaluation DB_MFC_NULL
APOS	Position for insertion of A number
	Type of Input	:	Single value, 11. parameter of a min-1-group
	Possible Values	:	0 - 44
	Default Value	:	0
BACKTYPE	MFC conversion tables, backward signals
	Type of Input	:	Single value, optional
	Possible Values	:	ANIBACKW	ani backward
			ANIFORW	ani forward
			MFPBACKW	mfp backw co -> system
			MFPFORW	MFP mode forward system -> co
			MFRPB	multi frequency packed backward
			MFRPF	multi frequency packed forward
			MFRSB	multi frequency shuttle backward
			MFRSF	multi frequency shuttle forward
			NULL	no evaluation
			R1	ccitt-r1 mode
			R2BKWD	Operation on CCITT-R2 mode
				CCITT-R2 standard operation
				PABX=terminal exchange
				Transmitter: Forward
			R2FORW	Operation on CCITT-R2 mode
				PABX=origin
				Transmitter: Forward
				Receiver : Backward
			SOCE6B	MFC SOCOTEL forward mode, Spain
				(CO sends dial signals to PABX)
				Transmitter: Control freq. (2 out of 6)
				Receiver : MFC signals
			SOCE6F	MFC SOCOTEL forward mode, Spain
				(CO sends dial signals to PABX)
				Transmitter: MFC signals
				Receiver : Control freq. (2 out of 6)
			SOCEB	MFC SOCOTEL (2 out of 5), Spain backward
				(PABX sends dial signals to CO)
				Transmitter: MFC signals (2 out of 5)
				Receiver : Control frequency
			SOCEF	MFC SOCOTEL forward mode, Spain
				(CO sends dial signals to PABX)
				Transmitter: MFC signals
				Receiver : Control freq. (2 out of 5)
			SOCFB	MFC SOCOTEL (2 out of 6), France
				backward (PABX sends dial signals to CO)
				Transmitter: MFC signals (2 out of 6)
				Receiver : Control frequency
			SOCFF	MFC SOCOTEL forward mode, France
				(CO sends dial signals to PABX)
				Transmitter: MFC signals
				Receiver : Control freq. (2 out of 6)
BSDIRCNT	length of basic directory number
	Type of Input:		single value, optional
	Possible Values:		numeric, 0-22
BSDIRNO	basic directory number
	Type of Input:		single value, optional
	Possible Values:		0-9,*,#,A-D, up to 22 characters
BSIG	Backward signal to be transmitted
	Type of Input	:	Single value, optional
	Possible Values	:	0 - 15
	IF BSIG = 0 in the table BSIGA for BACKTYPE = R2BKWD, then no BSIG will be send to CO.
	For SOCOTEL BSIG = 0 is interpreted as control frequency.
CATEGORY	Physical grp II signal to be transmitted (on identification)
	Type of Input	:	Single Value, optional
	Possible Values	:	0 - 15
CATTRANS	station category in case of transit
	Type of Input:		single value, optional
	Possible Values:		A-K
			ATND	attendant console
			ATND1	attendant console 1
			ATND2	attendant console 2
			DATA	data transfer
			DATA1	data transfer 1
			DATA2	data transfer 2
			DATANTLL	data no toll
			FWDCO	call forwarding to central office (co)
			IGNFWD	ignore call forwarding
			INFO	info
			LOCLCALL	local call
			NOMEAN	no meaning
			NOMENTLL	no meaning, no toll
			PRIO	with priority
			PRIO1	with priority 1
			PRIO2	with priority 2
			PRIONTLL	priority, no toll
			SATELLIT	sattelite
			TESTEQ	test equipment
			TOLLCALL	toll call
			TRANSIT	transit
CHADGT	Change digits (Y/N)?
	Type of Input	:	Single value, mandatory
	Possible Values	:	N,NO	[no],no, criterion for req. sig./digit entry changes
			Y,YES	[yes],yes, criterion for req. sig./digit entry changes
CHAREQ	Change request signal(s)
	Type of Input	:	Single value, mandatory
	Possible Values	:	N,NO	[no], no, criterion for req. sig./digit entry changes
			Y,YES	[yes], yes, criterion for req. sig./digit entry changes
CHEXAC	Change exchange access code for identification (Y/N)?
	Type of Input	:	Single value, mandatory
	Possible Values	:	N,NO	[no], no digits to be changed. If there is a value entered for the succeding parameter EXACFI this value is ignored.
			Y,YES	[yes], digits are to be changed according tor the parameter EXACFI; if nothing is specified number of digits and the digits themselves will be set to 0.
CHLCLTR	Change local trunc code (Y/N)?
	Type of Input	:	Single value, mandatory
	Possible Values	:	N,NO	[no], no digits to be changed. If there is a value entered for the succeding parameter LCLTRCD this value is ignored.
			Y ,YES	[yes], digits are to be changed according tor the parameter LCLTRCD; if nothing is specified LCLTRCD will be deleted.
CHTRDIS	Change traffic discrimation digit for identification (Y/N)?
	Type of Input	:	Single value, mandatory
	Possible Values	:	N,NO	[no], no digits to be changed. If there is a value entered for the succeding parameter TRDISDI this value is ignored.
			Y,YES	[yes], digits are to be changed according tor the parameter TRDISDI; if nothing is specified the TRDISDI will be deleted.
CNT	Number of valid postions on the ID sequence
	Type of Input	:	Single value, optional
	Possible Values	:	0 - 22
	Default Value	:	Number of specified hexadecimal digits of the parameter ID
	If CNT is less than the number of characters specified with ID, then only the value entered for CNT is taken into account.
	If CNT is greater than the number of characters specified with ID, then the value entered for ID is boosted by adding zeroes (’0’) to the hexadecimal number.
	If CNT=0, ID is deleted.
COEX	Class of external
	Type of Input	:	Single value, optional
	Possible Values	:	0 - 16
COEXTRAN	Class of external in case of transit
	Type of Input	:	Single value, optional
	Possible Values	:	0 - 12
CTLF	Supervision time for control frequency (removal)
	Only used for SOCOTEL (BACKTYPE/FORWTYPE=SOCFB/SOCEB/SOCFF/SOCEF)
	Type of Input	:	Single value, optional
	Possible Values	:	0-999999
			0 = Deactivate supervision
DGTS	Evaluation table digit(s)
	Number of digits + digits of an evaluation table
	Type of Input	:	Single value, optional
	Possible Values	:	0 - 9, A - F, of max 6 hexadecimal digits
			No input is interpreted as meaning no digits.
			(Number of digits and the digits themselves will be set to 0.)
DIGIT	mfc-signal see CCITT Q.441
	Type of Input:		single value, optional
	Possible Values:		numeric, 0-15
DINFO	Dialing Information
	Type of Input	:	Single value, optional
	Possible Values :		ADINFO	Additional information (reserved)
			ANO	Transfer to A-party number
			DGT	Transfer dialed digits
			IDEND	End of A-party number transfer
			IDREF	Send A-party number request refused
			IDSEND	Send A-party number
			INCO	Dialing incomplete
			NOPO	Not possible
			NULL	No evaluation
			TRACE	Malicious call trace
EODTYPE	End-of-dial signal type (digit analysis result)
	Type of Input		1 to 20 single values, concatenated with &, mandatory
	Possible Values		ADVICE	station returning advisory / recorded info
			BSYCO	Device busy on CO call
			BSYTIE	Device busy on tie/house call
			BUSY	Device busy
			CONG	Congestion / exchange busy
			DIDDND	station has do not disturb for indial
			DND	Do not disturb is active
			STNCL	station/subscriber class
			ETEMIN1	End to End, repeat second last digit (n-1)
			ETEMIN2	End to End, repeat second last digit (n-2)
			ETEMIN3	End to End, repeat second last digit (n-3)
			ETEMINX	End to End, repeat all digits
			ETENORSP	End to End, no backward signal
			FRCHG	Device free, call charges
			FRNCHG	Device free, no call charges
			IDENT	Changeover to identity check state
			INCO	Dialing incomplete
			MCIDFC	subscriber call tracing and free of charge
			NASS	Call fwd. LODEN / station no. LODEN not assigned)
			NAUTH	Connection does not have required authorization
			NAVA	Not available (finding or hunt restrictions)
			NOPO	Not possible
			NVAL	Not valid
			OVR	override busy station
			TEST	Connection to test circuit
			TRACE	Malicious call trace
			TRANS	Through-connection (transit) to ATND console
EVTBL	Pointer to MFC evaluation tables
	Type of Input	:	Single value, mandatory
	Possible Values	:	0 - 3
EXACFI	Exchange access code for identification
	Type of Input	:	Single value, optional
	Possible Values	:	0 - 9, A - D, *, #, of max. 6 digits
FILLCHAR	fill character at minimal digit position
	Type of Input:		single value, optional
	Possible Values:		hexadecimal, up to 1 characters
FORWTYPE	MFC conversion tables, forward signals
	(see parameter BACKTYPE for description)
FSIG2	Group state for forward signal
	Type of Input		1 to 23 single values, concatenated with &, mandatory
	Possible Values		ANI1-10	ani kategorie 1-10
			AXINT	Call extension by ATND with intervention/announcement
			AXNOI	call extention by atnd without intervention/ann.
			AXRLS	Call extension by ATND with speed release
			COIN	Coin
			DATA	Data transmission
			DATANTLL	data connection, no toll
			FWDCO	Forwarding to CO
			INATC	International call
			INATCLPR	internation call into private network
			INFO	Reference to ADINFO
			LOC	Local-Call
			LOCCLPR	local call into private network
			LOCNV	Local-Data-Call
			LOCS	Local service
			NATC	National call
			NATCLPR	national call into private network
			NATS	National service
			NOPO	Not possible
			PRISTN	Priority station or CO subscriber
			SATCONN	satellite connection
			STN	Station
			STNCAT1	Reserved
			STNCAT2	Reserved
			STNCAT3	Reserved
			STNNTLL	station no toll
			STNPRONT	station with priority, no toll
			STPRIO1	Station/subscriber with prio 1
			TEST	Connection to test circuit
			TOLLC	Toll-Call
			TOLLOP	Toll operator
			ROUTINE	MLPP routine call
			PRTY	MLPP priority call
			IMMED	MLPP immediate call
			FLASH	MLPP flash call
			FLASHOV	MLPP flash override call
			PROT	MLPP protected call
ID	Identification signal sequence
	Type of Input	:	Single value, optional
	Possible Values	:	0 - 9, A - F, of max. 22 hexadecimal digits
			MFC signal sequence of 1 - 22 hexadecimal digits
	Default Value	:	blank signal sequence
IDX	iIndex to evaluation table
	Type of Input	:	Single value, optional
	Possible Values	:	0 - 3	Evaluation table 0 to 3
			4	Toll call
			5	Local call
			6 - 99	Preliminaries
	Default Value	:	0
IMP	Revert to impulsing on error (MFC R2)
	If BACKTYPE/FORWTYPE=SOCFB/SOCEB this parameter is of no significance
	Type of Input	:	Single value, optional
	Possible Values	:	0 - 15
IMP2	Error with call forwarding to attendant
	Type of Input	:	Single value, optional
	Possible Values	:	0 - 15
IMPD	Duration of "IMP" pulse
	Only used for BACKTYPE/FORWTYPE=R2BKWD.
	If BACKYPE/FORWTYPE=SOCFB/SOCEB/SOCFF/SOCEF, this parameter is of no significance.
	Type of Input	:	Single value, optional
	Possible Values		numeric, 0-999999
IMPS	Seperation of MFC "IMP" pulse
	Only used for BACKTYPE/FORWTYPE=R2BKWD.
	If BACKYPE/FORWTYPE=SOCFB/SOCEB/SOCFF/SOCEF, this parameter is of no significance.
	Type of Input	:	Single value, optional
	Possible Values	:	numeric, 0-999999
INFO	Additional information to aid programming
	Type of Input	:	Single value, optional
	Possible Values		BSIG	End signal exchange, changeover to B signal
		:	DIAL	Dialing incomplete
			END	End exchange of signals
			IDENT	Changeover to identity check state
			INFOA	Reserved
			INFOB	Reserved
			INFOC	Reserved
LCLTRCD	Local trunc code
	Type of Input	:	Single value, optional
	Possible Values	:	0 - 9, A - D, *, #, of max. 6 digits
MAXDGTS	maximum number of a-digits from CO
	Type of Input:		single value, optional
	Possible Values:		numeric, 0-22
MFCVAR	MFC table
	Type of Input	:	1 to 3 single values, concatenated with & or &&, mandatory (CHANGE)
			1 to 3 single values, concatenated with & or &&, optional (DISPLAY / REGENERATE)
			single value, optional (COPY)
	Possible Values	:	numeric, 1-10
MFCVARI	Number of MFC table to COPY
	Type of Input	:	Single value, mandatory
	Possible Values	:	0 - 255
MFPPAUSE	Pause duration for MFP signaling (5ms steps)
	Type of Input	:	Single value,optional
	Possible Values	:	0 -1270 ms
MFPPULS	Pulse duration for MFP mode (5ms steps)
	Type of Input	:	Single value, optional
	Possible Values	:	0 -1270 ms
NEXTSIG	Supervision time for next signal, forward mode
	Type of Input	:	Single value, optional
	Possible Values		numeric, 0-999999
NXTSIG	Supervision time for next signal
	Type of Input	:	Single value, optional
	Possible Values		numeric, 0-999999
OPT	Branch parameter, MFC table option
	Type of Input for DISPLAY,TYPE=MFCVAR / REGENERATE,TYPE=MFCVAR
			1 to 2 single values, concatenated with &, optional
	Type of Input for		DISPLAY,TYPE=TBLF / REGENERATE,TYPE=TBLF
			1 to 7 single values, concatenated with &, optional
	Type of Input for DISPLAY,TYPE=TBLB / REGENERATE,TYPE=TBLB
			1 to 9 single values, concatenated with &, optional
	Type of Input for CHANGE,TYPE=MFCVAR / CHANGE,TYPE=TBLB / CHANGE,TYPE=TBLF
			single value, mandatory
	Possible Values for TYPE=TBLB (backward mode):
			BIDENT	Back. group A signal in origin
			BSIGA	Back. group A signal on dialing
			BSIGB	Back. group B signal on dialing
			BSIGB1	2nd Group B signal table
			EVAL	Evaluation tables
			FIDENT	Group I signal on ID check
			FORIA	Group II signal after A5
			FORIB	Group II signal after A3
			FSIG	Group I signal on dialing
	Possible Values for TYPE=TBLF (forward mode):
			BIDENT	Group A signal on ID check
			BSIGA	Group A signal on dialing
			BSIGB	Group B signal on transition to grp II
			BSIGB1	2nd group B signal table
			BSIG2	Back grp II sig on transition to B sig
			DIALOUT	Evaluation of digits to send
			FIDENT	Back. significance on ID check
	Possible Values for TYPE=MFCVAR
			MFCVAR	miscellaneous data for a specified variant
			SUPERV	supervision parameters for evaluation
ORIG	Originating party signal handling option
	Type of Input	:	Single value, single value, optional
	Possible Values	:	COEX	Class of externals
			EVAL	Evaluation of dialed number,
			NOPO	Not possible (error listing is output)
			SIG	apply the backward signal from group b
PABXID	PABX identification sequence
	Type of Input	:	Single value, optional
	Possible Values	:	0 - 9, A - F, of max. 22 hexadecimal digits
			MFC signal sequence of 1 - 22 hexadecimal digits
	Default Value	:	blank signal sequence
PAR	Parameters (attributes) for MFC variant
	Type of Input	:	1 to 17 single values, concatenated with &, optional
	Possible Values		AMTC2	Electro mechanical exchange of type C2
			AMTC3	Electro mechanical exchange of type C3
			CATTOID	change category to identifier
			CHKIDDGT	check first digit at ident
			CHRGSIM	activate call charging simulateion
			EOFSEL	send dialing end to lw
			FRELBU	forward release if busy
			FRELSB	forward release if station busy
			IDBEFBS	identify before b station
			IDCAT	Station/subscriber category number transfer.
			IDNOCAT	identification without station/sub. category
			IGNI15	ignore i-15 as first sign
			KATTOA	category is part of A number
			MFCMO	mfc monitoring message for test
			MFRP3	mfr-packet protocol 3
			MFRPE	mfr-packet with echo blocking
			MFRPRES	reserved parameter 1 for MFRP
			NOB11	no B11-Signal at incoming long distance seizure
			NOMFCMO	supress mfc monitoring message
			NONE	No attribute
				NONE is used to delete resp. override values of the parameter PAR. If NONE is used in combination with other values, only the values after NONE will be accepted.
			NOTNER	Backward release on error without alerting tones or MFC register signals (e.g. as for Belgium).
			PRIOSUB	subscriber with override authorization
			RSV1	Reserve attribute 1 for diverse country-specific adaptations.
			RSV2	Reserve attribute 2 for diverse country-specific adaptations.
			RSV3	Reserve attribute 3 for diverse country-specific adaptations.
			RSV4	Reserve attribute 4 for diverse country-specific adaptations.
			RSV5	Reserve attribute 5 for diverse xcountry-specific adaptations.
			SOCEBWS	extended backwardsignal (socotel)
			SOCTEST	exchange simulation ibercom,mfc-socotel (spain)
			SPCMA	Programmable exchange of type SPC with A number
			SPCOA	Programmable exchange of type SPC w/o A number
			TRANSWB	without b-signal at transit if b-number available
			WBEOAAN	wait between end of address and answer
			TSTSTATE	activate test states
			MLPP	Multi-Level Precedence and Preemption Service
PCNT	Number of valid position in the PABX ID
	Type of Input	:	Single value, optional
	Possible Values	:	0 - 22
	Default Value	:	Number of specified hexadecimal digits of the parameter PABXID
	If PCNT is less than the number of characters specified with PABXID, then only the value entered for PCNT is taken into account.
	If PCNT is greater than the number of characters specified with PABXID, then the value entered for ID is boosted by adding zeroes (’0’) to the hexadecimal number.
	If PCNT=0, ID is deleted.
PHYSIG	Supervision physical forward signal
	Grp I forward signal on dialing (TYPE=TBLB, OPT=FSIG)
	Grp I forward signal, significance after A5 (TYPE=TBLB, OPT=FORIA)
	Grp I forward signal on ID check (TYPE=TBLB, OPT=FIDENT)
	Grp II forward signal, significance after A3 (TYPE=TBLB, OPT=FORIB)
	Type of Input	:	Single value, concatenated single values(max.16)
			optional (for TYPE=TBLF, OPT=BSIG2)
			mandatory (else)
	Possible Values	:	0 - 15
POS1	Position for the insertion of various id sig. blocks, e.g. PABXID
POS2	Position for the insertion of various id sig. blocks, e.g. PABXID
POS3	Position for the insertion of various id sig. blocks, e.g. PABXID
POS4	Position for the insertion of various id sig. blocks, e.g. PABXID
	Type of Input	:	Single value, optional
	Possible Values	:	0 - 22
	Default Value	:	0
RMVCTL	Supervision time for control frequency removal
	Only used for SOCOTEL (BACKTYPE/FORWTYPE=SOCFB/SOCEB/SOCFF/SOCEF)
	Type of Input	:	Single value, optional
	Possible Values	:	0 - 999999 milliseconds
			0 = Deactivate supervision
RMVSIG	Supervision time for removal of forward signal
	Type of Input	:	Single value, optional
	Possible Values	:	0 - 999999 milliseconds
			0 = Deactivate supervision
SIG	Logical significance of an MFC signal (on dialing)
	For SOCOTEL (BACKTYPE/FORWTYPE=SOCFB/SOCEB/SOCFF/SOCEF) only the values SIG = DGT0 - DGT15 may be allowed for the forward signal (not verified by the AMO)
	Type of Input	:	Single value, mandatory
	Possible Values	:	DGT0 - DGT15	Number of called station
			REJ	Request rejected i.e information requested is not available
			EOD	End of dialing / pulsing or end of identification
			NOPO	Not possible
			EVAL	Evaluation of dialed number pointer to evaluation table (parameter IDX)
			GR2	group II signal
			IDALLWD	ident allowed
SIGLENF	Signal duration (length) in forward mode
	Type of Input	:	Single value, optional
	Possible Values	:	0 - 999999 milliseconds
			0 = Deactivate supervision
SIGN	Backward signal name
	Type of Input	:	Single value, mandatory
	Possible Values	:	INCO	Dialing incomplete
			MIN1	Repeat second last digit (N - 1)
			MIN2	Repeat third last digit (N - 2)
			MIN3	Repeat fourth last digit (N - 3)
			RPTALL	Repeat all digits from beginning
			BSIG	End signal exchange, change to B sig
			BUSY	Station busy
			BSYINT	Station busy on internal call
			BSYCO	Station busy on CO call
			BSYLCL	Station busy on local call
			BSYTOLL	Station busy on toll call
			CONG	Congestion / exchange busy
			STNCL	Station/subscriber class
			IDENT	Send station number of A station
			TRACE	Start malicious call trace
			NOTERM	No terminal connection
			NEWNO	Number changed
			FRCHG	Station free, call charges
			FRNCHG	Satatio free, no call chanrges
			FAULT	Station or station port fault
			OLDSTN	Previous station/subscriber
			NOPO	Not possible
			NVAL	Not valid
			NOT	Send notification tone
			FPTYC	First Party Control
			CPTYC	Calling Party Control
			BSYNOVR	No override at busy station
			BSIGN2	B-signal (reserved)
			BSIGN3	B-signal (reserved)
			GRADIG	Send digits group ’a’
			GRCDIG	Send digits group ’c’
			ALLDIG	Send all digits
			CALLCLS	Send call class
SLEN1	extended send time 1
	Type of Input	:	Single value, optional
	Possible Values	:	0 - 999999 milliseconds
SLEN2	extended send time 2
	Type of Input	:	Single value, optional
	Possible Values	:	0 - 999999 milliseconds
SPAU	Pause duration until send of next signal
	Type of Input	:	Single value, optional
	Possible Values	:	0 - 999999 milliseconds
STADIAL	Supervision time for first signal i.e. start dial supervision
	Type of Input	:	Single value, optional
	Possible Values	:	0 - 999999 milliseconds
			0 = Deactivate supervision
STNCAT	Station/subscriber category
	Type of Input	:	Single value, optional
	Possible Values	:	STN	Station
			PRISTN	Priority station or CO subscriber
			ANI1-10	ani kategorie 1-10
			DATA	Data transfer
			AXRLS	Call extention by ATND with speed rel.
			TOLL	Toll Call
			LOC	Local Call
			LOCNV	Local Data Call (non-voice)
			LOCCLPR	local call to private network
			TEST	Connection to test circuit
			COIN	Coin
			AXINT	Call ext. by ATND with intervention/ann
			AXNOI	Call ext. by ATND without intervention/announcement
			STPRIO1	Station/subscriber with priority 1
			TOLLOP	Toll operator
			FWDCO	Forwarding to CO
			INFO	Reference to additional information
			NOPO	Not possible
			STNCAT1	Reserved
			STNCAT2	Reserved
			STNCAT3	Reserved
			STNNTLL	station no toll
			STNPRONT	station with priority, no toll
			DATANTLL	data connection no toll
			NATCLPR	national call into private network
			INATCLPR	international call into private network
			SATCONN	satellite connection
			ROUTINE	MLPP routine call
			PRTY	MLPP priority call
			IMMED	MLPP immediate call
			FLASH	MLPP flash call
			FLASHOV	MLPP flash override call
			PROT	MLPP protected call
TNSIG	Supervision time for event: Tone signal present
	Type of Input	:	Single value, optional
	Possible Values	:	0 - 999999 milliseconds
			0 = Deactivate supervision
TRDISDI	Traffic discrination digit for identification
	Type of Input	:	Single value, optional
	Possible Values	:	0 - 9, A - D, *, #, of max. 6 digits
TYPE	Branch parameter
	Type of Input	:	Single value
			mandatory (CHANGE)
			optional (DISPLAY, REGENERATE)
	Possible Values	:	MFCVAR	MFC variant table
			TBLB	MFC conversion table, backward signals
			TBLF	MFC conversion table, forward signals
			ALL	Output all MFC information (DISPLAY and REGENERATE)
			HD	Display a list of all existion MFC initialization tables on harddisk (only DISPLAY)