150.2.2 CHANGE-PERSI

Change the length entries for each pin type. Any type of PIN can be deactivated by specifying "0" as PIN length.
(this is only possible if the relevant PINs have not been created already)

Change the pointer indicating the card personal ID number

Change the company code or the pointer indicating the company code

Change one of the assigned names

Change one of the assigned ORG entries. This entry will be automatically changed for all names to which it is assigned.

Change one of the assigned ORG entries for all names assigned to the specified station number(s).

Change one of the assigned ORG entries for a specific name.

Change specific codes
(OLDCODE and NEWCODE must be of equal length)
If the same COSXCD is assigned to serveral different station numbers, the code can be changed only for the station concerned by specifiying the station number. If the station number is omitted, the code will be changed for all station numbers.

Change the code-calling number associated with a registered station number for a particular CCMS.

10.

Change the COPIN in the COPIN table.

11.

Change the modulo check algorithm.

12.

Change the email address.

Procedure Overview


Command Code	Parameter
CHANGE-PERSI	\|TYPE=SYS,{PINCLEN=<number>,COSLEN=<number> (1)
	,PIN1LEN=<number>, PIN2LEN=<number>
	,PIN3LEN=<number>, PIN4LEN=<number>
	,PIN5LEN=<number>, SILEN=<number>
	,CDRACLEN=<number>, PIN10LEN=<number>
	,PIN11LEN=<number>, PIN12LEN=<number>
	,PIN13LEN=<number>, PIN14LEN=<number>
	,PIN15LEN=<number>
	,COSXCOS2=<string>,ATTEMPTS=<number>};

	\|TYPE=PINPOINT,PINPOINT=<number>; (2)

	\|TYPE=COCO,ITR=<number>,{COCO=<string> (3)
	,CPOINT=<number>};

	\|TYPE=NAME,STNO=<number>,[OLDNAME=<string>] (4)
	,NEWNAME=<string>, [CHARCON=<param>];

	\|TYPE=ORGSYS,OLDORG=<string>,NEWORG=<string>; (5)

	\|TYPE=ORGSTNO,STNO=<number>,OLDORG=<string> (6)
	,NEWORG=<string>;

	\|TYPE=ORGNAME,STNO=<number>,NAME=<string> (7)
	,NEWORG=<string>;

	\|TYPE=PIN,OLDPIN=<string>,NEWPIN=<string> (8)
	,[STNO=<number>];

	\|TYPE=CCMS,CCMSCD=<key-num>,[DPLN=<number>] (9)
	,STNO=<number>,CCNO=<key-num>
	,[ALLOC=<param>];

	\|TYPE=COPIN,COPIN=<number>, (10)
	,{COTYPE=<param>,PINTEXT=<string>
	,CDRTEXTS=<param>,CDRTEXT=<string>
	,DISPRSTN=<param>,PINTEST=<param>
	,TRKCD=<number>,TRKCDTYP=<param>
	,PINDUR=<param>,TRANSFER=<param>
	,IDHOME=<param>,DISPID=<param>
	,TRACE=<param>,PINEXT=<param>
	,DISPPIN=<param>,PINNKEY=<param>
	,DEACKEY=<param>,POSCHKN=<number>
	,COSHOME=<param>,PINLCOS2=<param>,DPTEST=<param>
	,DISPTRKC=<param>,PARARNGM=<param>, PRIMDEV=<param>};

	\|TYPE=MODULO,MODULO=<number> (11)
	,{VALENCE=<number>,TYPESUM=<param>
	,MODULUS=<number>,CHKNLEN=<param>
	,TYPECKN=<param>};

	\|TYPE=EMAIL,STNO=<number>,EMAIL=<string>; (12)

Notes:

CHANGE-PERSI:TYPE=ORGSYS or TYPE=ORGSTNO:

If several OLDORGs are to be changed to a NEWORG (new organizational unit), the NEWORG must be specified only once. All remaining OLDORGs will then be assigned this NEWORG.

CHANGE-PERSI:TYPE=ORGNAME:

If a NEWORG is to be allocated for several names (change existing ORG to another), then the NEWORG need be entered only once. All remaining names are then allocated the new organizational unit.

CHANGE-PERSI:TYPE=NAME:

If the first name (i.e. the name which is displayed on the screen) is to be changed, the parameter OLDNAME can be omitted and the name which used to be the first name is overwritten with the first NEWNAME.

CHANGE-PERSI:TYPE=PIN:

If the same COSXCD is assigned to several different stations, the STNO parameter needs to be specified only when changing the COSXCD.

Examples

Assignment of station number.3109 designated ’FLIERL*GABI’ to a new organizational unit designated ’PN V8332’.

Input:

CHANGE-PERSI:TYPE=ORGNAME,STNO=3109,NAME=FLIERL*GABI,NEWORG=PN V8332;

Change email address for station 12100

Input:

CHANGE-PERSI:TYPE=EMAIL,STNO=12100,EMAIL=anonymous@unify.com;

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.