152.4.2 Advisories

 
H02:
PD @@@@ has been overwritten by copying.
H03:
PD @@ has been stored to location @@@@.
H04:
IMPORTANT! PD @@@@ is now deactivated. The PD has to be activated with the following command:
CHANGE-PRODE:PD,@@@@,ORG,,Y;
H05:
Upper limit @@@ of memory has been exceeded.
H06:
There are none of the wanted PVCDs on HD.
H07:
There are none of the wanted PDs on HD.
H08:
There is no PVCD loaded.
H09:
There is no PD stored in @@@@.
H10:
Important! ACTIVE=YES in the command line is ignored. The PD has to be
activated with the following command:
CHANGE-PRODE:PD,@@@@,ORG,,Y;
 
 
 
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620
 © 09/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.