154.3.2 DISPLAY-PTIME

If parameter DEV is not specified, all parameter blocks (0 - 31) which were copied into the DB will be output.
Procedure Overview
 
Command Code
Parameter
DISPLAY-PTIME
TYPE=SLMA;
 
|TYPE:SLMA1;
 
|TYPE:TSAC;
 
|TYPE=REST,[DEV=<param>]
 
 
Example
Interrogate the SLMA module resp. Optiset/OptiPoint timers:
Input:
DISPLAY-PTIME:SLMA;
Output:
SLMA TIMERS:
============

RNGON0 = 1000 MS. RNGOFF0 = 4000 MS. RNGON11 = 300 MS.
RNGOFF11 = 400 MS. RNGON12 = 300 MS. RNGOFF12 = 4000 MS.
RNGON2 = 1000 MS. RNGOFF2 = 1000 MS. RNGON31 = 300 MS.
RNGOFF31 = 400 MS. RNGON32 = 300 MS. RNGOFF32 = 1000 MS.
RNGON5 = 500 MS.
RNGON61 = 200 MS. RNGOFF61 = 200 MS. RNGON62 = 200 MS.
RNGOFF62 = 200 MS. RNGON63 = 200 MS. RNGOFF63 = 4000 MS.
FLASHMIN = 40 MS. FLASHMAX = 110 MS. ONHOOK = 100 MS.
INTERDIG = 100 MS. SPCL = 1000 MS. FLASH = 600 MS.

H01: CAUTION: THE MODIFIED TIME PARAMETERS WERE NOT LOADED INTO
THE CIRCUIT MODULES.
PLEASE PULL AND REPLUG THE MODULES CONCERNED.
Note:
Ignore the displayed values for RNGON61 to FLASH for the "old" SLMA modules Q2041, because they can’t be loaded on the modules. They are only valid fpr the "new" SLMA modules Q2141 and Q2157.
Example
Interrogate individual SLMA1 module timers:
Input:
DISPLAY-PTIME:SLMA1;
Output:
SLMA1 TIMERS:
=============
TBLK = 0; FLASHMIN = 50 MS. FLASHMAX = 130 MS.
ONHOOK = 150 MS. INTERDIG = 100 MS.
SPCL = 1000 MS. FLASH = 600 MS.
PULSED = 0 MS. PAUSED = 0 MS.

TBLK = 1; FLASHMIN = 50 MS. FLASHMAX = 1000 MS.
ONHOOK = 1100 MS. INTERDIG = 50 MS.
SPCL = 50 MS. FLASH = 0 MS.
PULSED = 0 MS. PAUSED = 0 MS.

TBLK = 2; FLASHMIN = 190 MS. FLASHMAX = 350 MS.
ONHOOK = 500 MS. INTERDIG = 2000 MS.
SPCL = 2000 MS. FLASH = 2000 MS.
PULSED = 0 MS. PAUSED = 0 MS.

TBLK = 3; FLASHMIN = 40 MS. FLASHMAX = 110 MS.
ONHOOK = 200 MS. INTERDIG = 300 MS.
SPCL = 1500 MS. FLASH = 1000 MS.
PULSED = 0 MS. PAUSED = 0 MS.

H01: CAUTION: THE MODIFIED TIME PARAMETERS WERE NOT LOADED INTO
THE CIRCUIT MODULES.
PLEASE PULL AND REPLUG THE MODULES CONCERNED.
Example
Interrogate the timers for device type TSAC:
Input:
DISPLAY-PTIME:TSAC;
Output:
TSAC TIMERS:
============

TBLK = 0; IMPTYPE1 = 60 MS. IMPTYPE2 = 140 MS. RLSPFW = 700 MS.
RLSPBK = 2300 MS. ASSTYPE1 = 100 MS. ASSTYPE2 = 120 MS.

TBLK = 1; IMPTYPE1 = 40 MS. IMPTYPE2 = 80 MS. RLSPFW = 120 MS.
RLSPBK = 120 MS. ASSTYPE1 = 35 MS. ASSTYPE2 = 35 MS.

TBLK = 2; IMPTYPE1 = 800 MS. IMPTYPE2 = 800 MS. RLSPFW = 4000 MS.
RLSPBK = 4000 MS. ASSTYPE1 = 800 MS. ASSTYPE2 = 800 MS.

TBLK = 3; IMPTYPE1 = 100 MS. IMPTYPE2 = 200 MS. RLSPFW = 1000 MS.
RLSPBK = 1000 MS. ASSTYPE1 = 40 MS. ASSTYPE2 = 40 MS.

TBLK = 4; IMPTYPE1 = 120 MS. IMPTYPE2 = 220 MS. RLSPFW = 2000 MS.
RLSPBK = 2000 MS. ASSTYPE1 = 120 MS. ASSTYPE2 = 150 MS.

TBLK = 5; IMPTYPE1 = 140 MS. IMPTYPE2 = 240 MS. RLSPFW = 500 MS.
RLSPBK = 500 MS. ASSTYPE1 = 700 MS. ASSTYPE2 = 700 MS.

Example
Interrogate the timers for the remaining device types e.g. DEV = DIDLRB:
Input:
DISPLAY-PTIME:REST,DIDLRB;
Output:
REST TIMERS:
============

INIBLOCK: 52 DEVICE: DIDLRB TBLOCK: 0
----------------------------------------------------------------
LONGTIME:
L1 = 300, L2 = 600, L3 = 10000, L4 = 2000,
L5 = 0, L6 = 0, L7 = 0,
SHORTTIME:
S1 = 32, S2 = 32, S3 = 32, S4 = 32,
S5 = 32, S6 = 32, S7 = 30, S8 = 20,
S9 = 72, S10 = 80, S11 = 12, S12 = 70,
S13 = 0, S14 = 0,
SHORT-PARA:
P1 = 1, P2 = 1, P3 = 0, P4 = 0,
P5 = 2, P6 = 2, P7 = 4, P8 = 0,
P9 = 90, P10 = 0, P11 = 2, P12 = 0,
P13 = 0, P14 = 0.

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620
 © 09/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.