155.3 Parameter Description

 
ACT
Recorder activation required
 
Type of Input
:
Single value, optional
 
Possible Values
:
Y(YES)
do activate the recorder
 
 
 
N(NO)
do not activate the recorder
 
Default Value
:
Y
 
 
 
 
 
 
CCTIDX
index into timer block table for SLMA/SLMA2/SLMAR circuit (applies to SLMA Q2141-X, Q2157-X, SLMA2 Q2146-X and to SLMAR Q2480-X only; see AMO PTIME, TYPE=SLMA1 for the times to be set)
 
Type of Input
:
Single value, optional
 
Possible Values
:
numeric, 0-16
 
 
Default Value
:
16 (null value)
 
 
 
 
 
 
CLASSMRK
DNIL classmarks (for feature IPDA)
 
Type of Input
:
4 single values, concatenated with ’&’, optional
(ADD / CHANGE)
 
 
 
VAD
voice activity detection
 
 
 
EC
echo cancellation
 
 
 
G711
no voice compression, according to G.711
 
 
 
G729
voice compression (mandatory) according to G.729A
 
 
 
G729OPT
voice compression (optional) according to G.729A
 
 
 
INIT
initialisation of classmarks to default
 
 
 
NONE
deactivation of all classmarks
 
 
 
 
 
 
 
 
ML
multiple listeners
 
 
 
VIAHHS
connection via hhs
 
Default Value
 
G711
 
 
 
 
 
 
COFIDX
index of cofi data file to be loaded
 
Type of Input
:
Single value, optional
 
Possible Values
:
0 = Data block for Germany
1 = Data block for Austria
2 = Data block for Australia
3 = Data block for Spain and Belgium
(L > 2x250 Ohm)
4 = Data block for Spain and Belgium
(L <= 2x250 Ohm)
The default value to be assigned for Spain and Belgium is 4.
 
 
 
5 to 7
reserved for future use
 
Default Value
:
0
 
 
 
 
 
 
HMUSIC
Number of music-on-hold recording
 
Type of Input
:
Single value, optional
 
Possible Values
:
numeric, 1-150
 
 
Default Value
:
lowest available number
 
 
 
 
 
LENGTH
Length of recorded announcement in seconds
 
Type of Input
:
Single value, optional
 
Possible Values
:
numeric, 1-90
 
 
 
 
1 - 16
for ACDR, RANDOM
 
 
 
1 - 14, 15 - 90 in increments of 5
 
 
 
 
for ACDR, FIXED START
 
Default Value
:
3 seconds
for ACDR, RANDOM
 
 
 
none
for ACDR, FIXED START
 
 
 
 
 
MUSNUM
Number of music recording
 
Type of Input
:
Single value, optional
 
Possible Values
:
numeric, 1-32
 
 
Default Value
:
lowest available number
 
 
 
 
 
NO
Number of recorders to be created
 
Type of Input
:
Single value, optional
 
Possible Values
:
numeric, 1-30
 
 
Default Value
:
1
 
 
When the parameter NO is entered, the parameter PEN, which
 
describers the starting port, can also be entered.
 
 
 
 
 
OPMODE
Operation mode for recorders
 
Type of Input
:
single value, mandatory (ADD)
 
 
 
single value, optional (CHANGE)
 
Possible Values
:
DEMAND
Announcement on demand
 
 
 
CONT
Announcement is played continuously
 
Default Value
:
none
 
 
Note:
 
DEMAND is only allowed with OPTYPE FIXED.
 
 
 
CONT is only allowed with OPTYPE RANDOM.
OPTYPE
Operation type for recorder
 
Type of Input
:
single value, mandatory (ADD)
 
 
 
single value, optional (CHANGE)
 
Possible Values
:
RANDOM
Random start
 
 
 
FIXED
Fixed start
 
Default Value
:
none
 
 
 
 
 
 
PEN
Port Equipment Number (LTG-LTU-SLOZ-CCT)
 
Type of Input
:
4 single values, concatenated with -, mandatory
(CHANGE / DELETE)
 
 
 
4 single values, concatenated with -, optional
(ADD / DISPLAY / REGENERATE)
 
Possible Values
:
numeric, 0-145
in the form of g-uu-sss-ccc
 
 
 
g
= LTG number 1 (no other values)
 
 
 
uu
= LTU number
1-15 in Host System
17-99 in Access Points
16 not defined
 
 
 
sss
= SLOT 1- 121
 
 
 
ccc
= Circuit 0 - 254
 
Default Value
:
For ADD command only: the AMO searches the system for an
 
 
 
available port matching the rest of the parameters.
 
 
 
For DISPLAY and REGEN: first pen of system
A suitable module must be configured to the slot addressed by PEN (AMO BCSU).
The possible LTU and Slot values for PEN depend on the systems architecture and can be found in the BCSU AMO description.
The possible Line values depend on the module type and its functionality.
They can be listed using DISP-BCSU: TYPE=PEN [,LTG=, LTU=, SLOT=, CCT=]; which will also output the actual PEN status (e.g. NOT CONNECTED).
 
 
 
 
 
PEN2
Port Equipment Number upper limit
 
Type of Input
:
4 single values, concatenated with -, optional
 
 
 
the form of gg-uu-sss-cc
 
Possible values
:
For description - see PEN
 
Default value
:
PEN value if PEN entered, else end of system
 
 
 
 
 
RECAPL
Application of the selected recorder
 
Type of Input
:
single value, mandatory (ADD)
 
 
 
single value, optional (CHANGE / DISPLAY / REGENERATE)
 
Possible values
:
ACDR
ACD announcement recorder
 
 
 
ACDMUS
ACD music recorder
 
 
 
HMUSIC
music-on-hold recorder
 
Default Value
:
none
 
 
 
 
 
RECNUM
Number of recorded announcement
 
Type of Input
:
single value, optional
 
Possible Values
:
numeric, 1-206
 
 
Default Value
:
lowest available number
 
 
 
 
 
REFRN
Listing of stations referencing music-on-hold recorders required
 
Type of Input
:
Single value, optional
 
Possible Values
:
Y(YES)
do list station numbers
 
 
 
N(NO)
do not list station numbers
 
Default Value
:
Y
 
 
 
 
 
 
SRCGRP
Source group index
 
Type of input
 
1 to 2 single values, concatenated with "&"
 
 
 
optional
 
 
Possible Values
 
1 - 255
 
 
 
 
 
 
TYPE
Type of output
 
Type of Input
:
Single value, optional
 
Possible Values
:
A
Activated ports, in service
 
 
 
D
Deactivated ports, not in service
 
 
 
CFIG
unoccupied ports suitable for
 
 
 
 
recorder ConFIGuration
 
Default Value
:
A and D
 
 
 
 
Activate and deactivated
 
 
 
 
 
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620
 © 09/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.