160.5 Error Messages and Advisories

160.5.1 Error Messages


F01:	UNIT NOT ACCESSIBLE
F02:	PARTNER CONTROLLER NOT STANDBY
F03:	SWU CONTROL INACTIVE
F04:	NO RELOAD FOR CSN
F05:	FUNCTIONAL UNIT NOT PRESENT
F06:	FUNCTIONAL UNIT DEFECTIVE
F07:	LTG NOT POSSIBLE IN THIS SYSTEM
F09:	ENTRY OF THE PARAMETER PRSTATE IS ADMISSIBLE ONLY FOR THE FOLLOWING VALUE COMBINATIONS: UNIT: BPA OR BPB, RSLEVEL: HARD OR RELOAD.
F11:	UNIT NOT AVAILABLE
F12:	LTU NOT POSSIBLE IN THIS SYSTEM ( LTU MAX = <number> )
F13:	UNIT=A1 IS NOT ALLOWED IN A MONOPROCESSORSYSTEM. TO RESTART A1 USE MODUL=BP.
F14:	STANDBY PROCESSOR CAN ONLY BE RESTARTED WITH HARD RESTART OR RELOAD.

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.